How much are PVC parts?
-
- Posts: 257
- Joined: Tue Aug 31, 2004 12:00 pm
-
- Posts: 361
- Joined: Sat Mar 22, 2003 1:00 pm
- Soakologist
- Posts: 575
- Joined: Fri Apr 04, 2003 1:00 pm
- SSCBen
- Posts: 6449
- Joined: Sat Mar 22, 2003 1:00 pm
-
- Posts: 257
- Joined: Tue Aug 31, 2004 12:00 pm
- SSCBen
- Posts: 6449
- Joined: Sat Mar 22, 2003 1:00 pm
I am afraid that this won't work. You can not make an APH and Collosus it. The APH is air pressure, and mods such as Collosus and the K-mod will not work. You can however made a CPS homemade like I have (and others have).Originally posted by Godzillasoaker65@Sep 14 2004, 06:20 AM
thank you, because I wanted to make an air pressure homeade, and do a colosus(SP?)sorry for posting in the wrong area.
-
- Posts: 257
- Joined: Tue Aug 31, 2004 12:00 pm
- BlueSmudge
- Posts: 886
- Joined: Sun Apr 18, 2004 10:57 pm
$40 if your lucky. Unlikely for your first homeade. Up to $100 depending on what you add/subtract, or change.
--------------------------------------------------------------
BlueSoak.net
--------------------------------------------------------------
BlueSoak.net
--------------------------------------------------------------
- kevinthenerd
- Posts: 22
- Joined: Wed Apr 05, 2006 4:14 am
If you just need the valve, you'd be better off buying the valves in the automotive department of a store or getting old bike tubes from bikes in the garbage (like I used to do).
I used to get all kinds of good stuff out of the trash. My favorite thing that I brought home was a 27" TV. I was too young and weak at the time to carry it (I'm 22 now.) I ended up using my friend's skateboard to bring it home. I think it just needed an new diode rectifier, and I was watching the Duck Tales movie that night. (It later had another more serious problem, but it was fun while it lasted.)
I used to get all kinds of good stuff out of the trash. My favorite thing that I brought home was a 27" TV. I was too young and weak at the time to carry it (I'm 22 now.) I ended up using my friend's skateboard to bring it home. I think it just needed an new diode rectifier, and I was watching the Duck Tales movie that night. (It later had another more serious problem, but it was fun while it lasted.)
- kevinthenerd
- Posts: 22
- Joined: Wed Apr 05, 2006 4:14 am
I spent about $110 (USD) on a huge beastly pneumatic launcher (4" chambers, 3" barrel, sprinkler solenoid valve, etc.). I would expect a smaller homebuilt water gun to cost a lot less than that.BlueSmudge wrote:$40 if your lucky. Unlikely for your first homeade. Up to $100 depending on what you add/subtract, or change.
Last edited by kevinthenerd on Wed Apr 05, 2006 4:43 pm, edited 1 time in total.