Vanquisher Nozzles

Threads about water gun modifications.
User avatar
-G-JiV-
Posts: 350
Joined: Sat Oct 09, 2010 8:10 pm

Re: Vanquisher Nozzles

Post by -G-JiV- » Wed Nov 24, 2010 11:13 pm

Not exactly...1 minute difference :D

As the orange piece is also screwed, you should try to break it gently off, it is only glued at two places, should not be too difficult^^

My PC only held as much as the vindicator's PC holds...then I removed this net, the bladder was o´covered with, and now my PC holds even more than 1,5 litres..its crazy!
But I will isntall a big valve and a big pipe...to get great streams! Till next updates, my friends :D
A gunner has to do what his Soaker requires...

User avatar
martianshark
Posts: 689
Joined: Mon Jul 06, 2009 10:24 pm

Re: Vanquisher Nozzles

Post by martianshark » Fri Dec 03, 2010 1:52 am

I'm catching up with you. :D I've K-modded large punching balloons onto my Vanquisher's bladder. I just need to buy a new clamp and figure out how to get it back in.

User avatar
-G-JiV-
Posts: 350
Joined: Sat Oct 09, 2010 8:10 pm

Re: Vanquisher Nozzles

Post by -G-JiV- » Fri Dec 03, 2010 8:29 am

hehe, in the meantime, I am installing a 1/2 ' ball valve, so I can provide enough power for big X:: streams :D I am one step further ;D

My only problem is that we have -10 degrees at the moment in Austria and it is a bit too cold to experiment with water... as soon as possible my work will be finished :)
A gunner has to do what his Soaker requires...

User avatar
martianshark
Posts: 689
Joined: Mon Jul 06, 2009 10:24 pm

Re: Vanquisher Nozzles

Post by martianshark » Fri Dec 03, 2010 6:50 pm

It's too cold for water fights here too, but I'll be ready for next year.

So you already Kmodded it again?

User avatar
-G-JiV-
Posts: 350
Joined: Sat Oct 09, 2010 8:10 pm

Re: Vanquisher Nozzles

Post by -G-JiV- » Fri Dec 03, 2010 7:16 pm

Yes, of course, I did :)

But I have used only 7 balloons and they are a bit bigger.

It is so difficult to replace the pipe and ball-valve AND keep the trigger working in its original position... But I really do not want to change the gun's appearance...

Too cold again :D -6 degrees
A gunner has to do what his Soaker requires...

User avatar
-G-JiV-
Posts: 350
Joined: Sat Oct 09, 2010 8:10 pm

Re: Vanquisher Nozzles

Post by -G-JiV- » Wed Dec 08, 2010 9:23 am

ok, the bigger ball valve is installed and sealed...so much work ;D

Here are pics :

The ball valve is now able to power 20 X:: streams or bigger ( it is about 35 X, if used directly)

This is what it looks like :)

Image
Image
Image

I will now put all back in, install a new trigger mechanism and a new nozzle selector...Sadly I will not be able to use the one I already built :D
A gunner has to do what his Soaker requires...

User avatar
zeda.beta
Posts: 683
Joined: Sun May 03, 2009 10:49 pm

Re: Vanquisher Nozzles

Post by zeda.beta » Thu Dec 09, 2010 2:38 am

Nice job with the mod, first time somebody actually k-modded a vanquisher successfully.

If the nozzle selector gives you a bigger blast, this might be a modern equivalent to a CPS.
I reject your reality and substitute my own.
Quack damn you.

User avatar
Killi101
Posts: 89
Joined: Sun May 30, 2010 11:30 pm

Re: Vanquisher Nozzles

Post by Killi101 » Fri Jan 14, 2011 4:11 pm

Looks great so far good luck!
Water:
dont like drinking much
like to throw it at people

Locked