Vanquisher Nozzles
- martianshark
- Posts: 689
- Joined: Mon Jul 06, 2009 10:24 pm
Re: Vanquisher Nozzles
Nobody has Kmodded a Vanquisher, but there was someone that Kmodded a Vindicator. However, when I opened my Vanquisher, I found that an orange piece that came off on the Vindicator would not come off on the vanquisher. Maybe you could just cut open the reservoir, but then you would have to figure out how to seal it back up.
- -G-JiV-
- Posts: 350
- Joined: Sat Oct 09, 2010 8:10 pm
Re: Vanquisher Nozzles
So, it is impossible to K-Mod the vanquisher without cutting open its reservoir ? ...THat is not good...I will have a try, may I can get it open
Vanquisher...come faster to me!!
Vanquisher...come faster to me!!
A gunner has to do what his Soaker requires...
- martianshark
- Posts: 689
- Joined: Mon Jul 06, 2009 10:24 pm
Re: Vanquisher Nozzles
Or you could try to find a way to get the orange piece off. It's glued on, so maybe it's possible to melt the glue. Or you might possibly be able to just pry it off. Personally, I would just try cutting it open, but you might want to try getting the orange piece off so you don't end up ruining the gun.
- -G-JiV-
- Posts: 350
- Joined: Sat Oct 09, 2010 8:10 pm
Re: Vanquisher Nozzles
Yes, that is important I think A not working, k-modded vanquisher is not that useful I think I will get the orange plastic piece of somehow...martianshark wrote:--- but you might want to try getting the orange piece off so you don't end up ruining the gun.
A gunner has to do what his Soaker requires...
- -G-JiV-
- Posts: 350
- Joined: Sat Oct 09, 2010 8:10 pm
Re: Vanquisher Nozzles
Ok, I have received my vanquisher today, I will now go and try to upgrade it WIsh me luck^^
I will get back when I finished modifications, with pics
I will get back when I finished modifications, with pics
A gunner has to do what his Soaker requires...
- -G-JiV-
- Posts: 350
- Joined: Sat Oct 09, 2010 8:10 pm
Re: Vanquisher Nozzles
Finished work
I have K-modded it, extended the PC(holds more than 1,5l ) and added 3 nozzles
Direct exit-stream(as much as possible)
shower-nozzle
X-nozzle( just for you, soakernerd )
Unfortunately I lost the connection wire between my Camera and the Computer, so I cannot provide pics yet...As soon as I found it you get pics etc. ---
I have K-modded it, extended the PC(holds more than 1,5l ) and added 3 nozzles
Direct exit-stream(as much as possible)
shower-nozzle
X-nozzle( just for you, soakernerd )
Unfortunately I lost the connection wire between my Camera and the Computer, so I cannot provide pics yet...As soon as I found it you get pics etc. ---
A gunner has to do what his Soaker requires...
- martianshark
- Posts: 689
- Joined: Mon Jul 06, 2009 10:24 pm
Re: Vanquisher Nozzles
That sounds awesome. Do you have pics of you doing the mods and the internals?
- -G-JiV-
- Posts: 350
- Joined: Sat Oct 09, 2010 8:10 pm
Re: Vanquisher Nozzles
Yea..I made some pics of moding and internals, but at the moment I have to find the computer adapter of my camera...grrr...
A gunner has to do what his Soaker requires...
- -G-JiV-
- Posts: 350
- Joined: Sat Oct 09, 2010 8:10 pm
Re: Vanquisher Nozzles
ok, found it...upload pics and they are with you One moment please
A gunner has to do what his Soaker requires...
- -G-JiV-
- Posts: 350
- Joined: Sat Oct 09, 2010 8:10 pm
Re: Vanquisher Nozzles
Opened gun
Trigger-valve (ball valve)
inner diameter of trigger-pipe(very small...)
rather long pump, smooth and easy to use
bladder out of its green bottle^^ Not we it is going to be interesting^^
bladder without plastic fixment
Bladder itself
K-Modded bladder
Original Nozzle selector
Modded nozzle selector(+ 3 nozzles)
I have already opened it again. I am going to replace the trigger-valve with a much bigger one and then install real X:: nozzles
I am so disapointed...such a strong bladder, great pump great reservoir and then ? trigger pipe is loosy and just the biggest nozzle could be used as water-save-nozzle...
But no problem, I transform it into one of the greatest guns ever, hehe...
But that will need some time(may a day or two...). In the meanwhile, enjoy my pics of the vanquisher
Trigger-valve (ball valve)
inner diameter of trigger-pipe(very small...)
rather long pump, smooth and easy to use
bladder out of its green bottle^^ Not we it is going to be interesting^^
bladder without plastic fixment
Bladder itself
K-Modded bladder
Original Nozzle selector
Modded nozzle selector(+ 3 nozzles)
I have already opened it again. I am going to replace the trigger-valve with a much bigger one and then install real X:: nozzles
I am so disapointed...such a strong bladder, great pump great reservoir and then ? trigger pipe is loosy and just the biggest nozzle could be used as water-save-nozzle...
But no problem, I transform it into one of the greatest guns ever, hehe...
But that will need some time(may a day or two...). In the meanwhile, enjoy my pics of the vanquisher
A gunner has to do what his Soaker requires...
- martianshark
- Posts: 689
- Joined: Mon Jul 06, 2009 10:24 pm
Re: Vanquisher Nozzles
So how did you get the green bottle off? I want to do this to my Vanquisher.
- -G-JiV-
- Posts: 350
- Joined: Sat Oct 09, 2010 8:10 pm
Re: Vanquisher Nozzles
I had no difficulties to get off the green bottle, just do not know what problem you have ?martianshark wrote:So how did you get the green bottle off? I want to do this to my Vanquisher.
My "orange plastic piece" was fixed by screwls, not glued. Getting off the fixment of the bladder was rather difficult but that is the only thing...
What do you mean ? show me pics, I do not know...
A gunner has to do what his Soaker requires...
- -G-JiV-
- Posts: 350
- Joined: Sat Oct 09, 2010 8:10 pm
Re: Vanquisher Nozzles
Before I forget...
The K-mod failed...all balloons popped, aparted from the first ballon I put over...they just do not expand as the bladder does...1,5 litre is too much, therefore I will need some special ballons,
The K-mod failed...all balloons popped, aparted from the first ballon I put over...they just do not expand as the bladder does...1,5 litre is too much, therefore I will need some special ballons,
A gunner has to do what his Soaker requires...
- martianshark
- Posts: 689
- Joined: Mon Jul 06, 2009 10:24 pm
Re: Vanquisher Nozzles
My orange piece was screwed and glued. I don't know how to get it off; I probably could open it if I could get the orange piece off.
Edit: Wow. We posted at the same time.
Edit: Wow. We posted at the same time.