K-mod Topic
- NiborDude
- Posts: 683
- Joined: Sun May 23, 2004 12:00 pm
- Dark Elite
- Posts: 217
- Joined: Wed Jul 14, 2004 1:46 pm
Same sorta thing as with my MD6K, that pump cap didn't want to come off, but with some force it'll come. Flat-tip screwdriver's my best shot at the things, lever a little bit in one place, then a little bit on the other side, the the bits in between, and it should come. If not, swear at it a few times and use more force. That seems to get it off.
Visit <span style='font-size:14pt;line-height:100%'><span style='color:red'>Sam's Supercars
<span style='font-size:8pt;line-height:100%'><span style='color range'><span style='font-family:Arial'><u>My Weaponry</u>
CPS2100 (Thank You King Soaker!
1 Liquidator/Pressurizer
1 Max-D 6000
1 XP310 w/my own power mod and 8 balloon XPS mod
2 piston-pistols (backup)
<span style='font-size:8pt;line-height:100%'><span style='color range'><span style='font-family:Arial'><u>My Weaponry</u>
CPS2100 (Thank You King Soaker!
1 Liquidator/Pressurizer
1 Max-D 6000
1 XP310 w/my own power mod and 8 balloon XPS mod
2 piston-pistols (backup)
- Dark Elite
- Posts: 217
- Joined: Wed Jul 14, 2004 1:46 pm
I think I have a 2100 MK2, how many balloons should I use and what should I reinforce to do a K?
Visit <span style='font-size:14pt;line-height:100%'><span style='color:red'>Sam's Supercars
<span style='font-size:8pt;line-height:100%'><span style='color range'><span style='font-family:Arial'><u>My Weaponry</u>
CPS2100 (Thank You King Soaker!
1 Liquidator/Pressurizer
1 Max-D 6000
1 XP310 w/my own power mod and 8 balloon XPS mod
2 piston-pistols (backup)
<span style='font-size:8pt;line-height:100%'><span style='color range'><span style='font-family:Arial'><u>My Weaponry</u>
CPS2100 (Thank You King Soaker!
1 Liquidator/Pressurizer
1 Max-D 6000
1 XP310 w/my own power mod and 8 balloon XPS mod
2 piston-pistols (backup)
- NiborDude
- Posts: 683
- Joined: Sun May 23, 2004 12:00 pm
I would say, anywhere from 40-80 balloons is best. Dux says 80 is best, I think around 70 is best.
No re-enforcing is needed when K-modding a 2100. Although, If its a really old gun, you might want to re-enforce, just incase.
No re-enforcing is needed when K-modding a 2100. Although, If its a really old gun, you might want to re-enforce, just incase.
<span style='color:EEF2F7'>Blinding ignorance does mislead us. O! Wretched mortals, open your eyes! -Leonardo Da Vinci
- DX
- Posts: 1780
- Joined: Wed Feb 04, 2004 1:00 pm
I only suggest 80 balloons because you can safely pump it to full without worrying about anything breaking. With 70, if you pump it too far then you are going to hear a loud *crack* and suddenly the gun stops shooting. The pressure is too much. However with 80 you can pump it all the way until it stops, which is only to 9 or 10 pumps. Anymore than 12 on 40-75 balloons isn't smart.
Mess With the Best, Get Soaked Like the Rest!
2004 Red Sox - World Series Champions
2007 Red Sox - World Series Champions!
2004 Red Sox - World Series Champions
2007 Red Sox - World Series Champions!
- Dark Elite
- Posts: 217
- Joined: Wed Jul 14, 2004 1:46 pm
OK, thanks. CVF too, right?
Nibor, it's still brand new, so I'll be OK without reinforcement, yeah?
Nibor, it's still brand new, so I'll be OK without reinforcement, yeah?
Visit <span style='font-size:14pt;line-height:100%'><span style='color:red'>Sam's Supercars
<span style='font-size:8pt;line-height:100%'><span style='color range'><span style='font-family:Arial'><u>My Weaponry</u>
CPS2100 (Thank You King Soaker!
1 Liquidator/Pressurizer
1 Max-D 6000
1 XP310 w/my own power mod and 8 balloon XPS mod
2 piston-pistols (backup)
<span style='font-size:8pt;line-height:100%'><span style='color range'><span style='font-family:Arial'><u>My Weaponry</u>
CPS2100 (Thank You King Soaker!
1 Liquidator/Pressurizer
1 Max-D 6000
1 XP310 w/my own power mod and 8 balloon XPS mod
2 piston-pistols (backup)
- Daedalus
- Posts: 12
- Joined: Mon Sep 27, 2004 4:55 am
Completed K-Mod yesterday on a CPS1000. ~45 pearlised baloons, very very small baloons too I had to really struggle to get the little B%$^#[at]s onto the CPS bladder.
I also tried Doom's suggestion for drilling out the vents on the side of the PC (good thinking, I'd missed that one! . However I Don't have anything to compare this with because I stupidly drilled the hoels at the same tiem as I did the K-Mod so I Don't know how much difference it made. What I do know is that the whole PC empties itself in under a second.
This is a little off the topic but has anyone though about a guage that tells you how full your PC is? It wouldnt be hard to make. Just knocked up a bit of a diagram. Obviosuly you'd have to make sure that the part inside the PC was as small as possible. You might want to countersink the hole a little if your going to use a sprint to push the meter out. This would probably get in the way during combat but for testing it might be useful. Its not nessesary but a spring would make things work a lot better and you would want to put markings along the shaft of the thing to determine how full the chamber was. probably a really thin bolt would do it. File the head down so it was really thin and use it on the inside of the PC. It might also pay to drill another small ventilation hole beside the bolt hole.
I also tried Doom's suggestion for drilling out the vents on the side of the PC (good thinking, I'd missed that one! . However I Don't have anything to compare this with because I stupidly drilled the hoels at the same tiem as I did the K-Mod so I Don't know how much difference it made. What I do know is that the whole PC empties itself in under a second.
This is a little off the topic but has anyone though about a guage that tells you how full your PC is? It wouldnt be hard to make. Just knocked up a bit of a diagram. Obviosuly you'd have to make sure that the part inside the PC was as small as possible. You might want to countersink the hole a little if your going to use a sprint to push the meter out. This would probably get in the way during combat but for testing it might be useful. Its not nessesary but a spring would make things work a lot better and you would want to put markings along the shaft of the thing to determine how full the chamber was. probably a really thin bolt would do it. File the head down so it was really thin and use it on the inside of the PC. It might also pay to drill another small ventilation hole beside the bolt hole.
- Attachments
-
- bladderdiag.jpg (10.75 KiB) Viewed 766 times
- Crashdummy
- Posts: 313
- Joined: Thu Aug 05, 2004 4:43 pm
- RacerSoaker445
- Posts: 951
- Joined: Sun Mar 14, 2004 2:27 pm
- Crashdummy
- Posts: 313
- Joined: Thu Aug 05, 2004 4:43 pm
- BlueSmudge
- Posts: 886
- Joined: Sun Apr 18, 2004 10:57 pm
Duct tape is much much much stronger than electrical tape.
You must have some bumb brand, Im sorry to tell you.
You must have some bumb brand, Im sorry to tell you.
--------------------------------------------------------------
BlueSoak.net
--------------------------------------------------------------
BlueSoak.net
--------------------------------------------------------------
- Crashdummy
- Posts: 313
- Joined: Thu Aug 05, 2004 4:43 pm
- SSCBen
- Posts: 6449
- Joined: Sat Mar 22, 2003 1:00 pm