Page 1 of 1

Water gun with plastic outer case

Posted: Tue Nov 01, 2011 1:02 am
by itsameluigi34
Would a water gun like this work?Image if your asking about the file name, the previous drawings were horrible. the image is on http://imageshack.us/photo/my-images/82 ... sofar.png/ , and i do not really know how to use a forum, and also, all the pipe used is 3/4.

Re: Water gun with plastic outer case

Posted: Tue Nov 01, 2011 2:21 am
by cantab
It would work, strictly speaking. However, LRT really needs to expand in length as well as width, meaning it's best to only have an inlet/outlet at one end, and the other end plugged and free-moving. A tube or pipe entering both ends of the LRT is asking for issues.

Re: Water gun with plastic outer case

Posted: Tue Nov 01, 2011 2:59 am
by itsameluigi34
Although one of the tubes would be a tubing barb with other end male and the other, is a tubing splicer, with the other tubing attached to another tubing barb with the other end male? So the pipe, so to say, would be flexible so the LRT can lengthen?

Re: Water gun with plastic outer case

Posted: Wed Nov 02, 2011 2:00 am
by atvan
Or you could make it the normal way and avoid the hassleā€¦

Welcome to the forums!

That would work, but would be overly complicated IMO. Remember, KISS.