Well I was just wandering around Home depot the other day and noticed in the electrical section there is electrical Pipe not sure if its PVC not. I found an expanding coupling that is practically a prefab pump. Regardless I believe it will work & Ill do the test to make sure for you guys. I will be using these in my New CPH Guns FYI
New Pump Idea
- Silence
- Posts: 3825
- Joined: Sun Apr 09, 2006 9:01 pm
Re: New Pump Idea
Those expanding couplings look extremely useful, as long as they're cheap enough. I know many homemade builders have managed to perfect their own ones, and I still want to fix mine, but still. If they were available in smaller diameters and larger lengths, that would help, too.
I've seen conduit pipe before, and I doubt it's well suited for water guns. It's flexible enough that you can use it to route wiring or low-pressure water around bends, but it's really not meant for pressure.
I've seen conduit pipe before, and I doubt it's well suited for water guns. It's flexible enough that you can use it to route wiring or low-pressure water around bends, but it's really not meant for pressure.
- adronl
- Posts: 200
- Joined: Thu May 07, 2009 1:28 am
Re: New Pump Idea
Well these are pvc or some sort maybe sch80 or not, I'm not sure yet but I have used this type before as an electrician it is for underground, outdoor wiring and it is crush resistant and has been used for irrigation to what success I do not know. But it is not metal and can bond with PVC. On the metal conduit part though you may have just given me a solid idea of how to route cables for the trigger of my new project that or thin flexible copper maybe.