PVC reference

Build a homemade water gun or water balloon launcher and tell us about it.
Locked
User avatar
SSCBen
Posts: 6449
Joined: Sat Mar 22, 2003 1:00 pm

PVC reference

Post by SSCBen » Wed Jun 20, 2007 3:59 pm

http://www.plumbingsupply.com/pipethreadsizing.html
Contains pipe OD, threads per inch for threaded pipe

http://www.harvel.com/pipepvc-sch40-80-dim.asp
Pipe dimensions and pressure ratings for schedules 40 and 80

http://www.ipexinc.com/Content/EN_CA/3_ ... course.asp
Online course on solvent cementing

http://www.awav.net/rpowers/pressure.htm
Pressure ratings for pipe, solvent cemented joints, and threaded joints

http://www.engineeringtoolbox.com/therm ... d_794.html
Temperature derating information

http://www.engineeringtoolbox.com/pvc-c ... d_796.html
The relationship between bursting pressure and the pressure rating

http://www.engineeringtoolbox.com/pvc-c ... d_795.html
PVC dimensions and weight

http://www.awav.net/rpowers/threaded.htm
Why threaded joints should not be tightened too much

http://www.elchem.com/making_solvent_cem_joints.htm
Information on solvent cementing

http://www.ppfahome.org/faq-cement.html
Information on suggested cure times for solvent welds

http://www.ppfahome.org/cement.html
Solvent welding tutorial

User avatar
Silence
Posts: 3825
Joined: Sun Apr 09, 2006 9:01 pm

Post by Silence » Fri Jul 27, 2007 9:06 pm

I created the attached Excel spreadsheet (PM if you want alternative formats) about two months ago but never zipped it up for upload. Guests may have to register/log in to view the attached file.

It's basically a chart of pipe sizes and some calculations based on those sizes - for example, pressure (based on a specific force). There's also a chart for prices and McMaster-Carr ordering information, although that isn't too useful either.

Speaking of which, I'm surprised the McMaster-Carr pipe sizes chart hadn't been listed here yet.
Attachments

[The extension xls has been deactivated and can no longer be displayed.]

Last edited by Silence on Tue May 26, 2009 1:36 am, edited 1 time in total.

User avatar
SSCBen
Posts: 6449
Joined: Sat Mar 22, 2003 1:00 pm

Re: PVC reference

Post by SSCBen » Tue Jun 03, 2008 7:17 pm

I've noticed that pipe manufacturers have a lot of technical information about their pipes. Here's a page with a bunch of information from Charlotte pipe: http://www.charlottepipe.com/Default.as ... =ABSPVCDWV

Download the PDF and use it for reference from time to time. It contains most everything you need to know and then some.

User avatar
SSCBen
Posts: 6449
Joined: Sat Mar 22, 2003 1:00 pm

CAD and pipe dimensions

Post by SSCBen » Thu Jun 05, 2008 2:48 pm

When designing a water gun, it's often important to visualize how the water gun will look. Most of the time for me I'm only interested in spacial dimensions, so a 2D CAD program like QCad is plenty adequate. The URLs below will help you figure out dimensions of parts for CAD drawings

Typically McMaster-Carr gives dimensions and for many items they have technical drawings or CAD files already made.

Charlotte Pipe has dimensional information for all of their fittings. Their Plastics Technical Manual also has a bunch of dimensional information about their pipes.

Often weight figures are also given which can help you get an idea of how much your water gun will weigh.

User avatar
Silence
Posts: 3825
Joined: Sun Apr 09, 2006 9:01 pm

Re: CAD and pipe dimensions

Post by Silence » Thu Jun 05, 2008 3:27 pm

This thread seems to overlap with the PVC reference thread, which is also stickied.

I have a list of pipe dimensions for Schedule 40 and Schedule 80 PVC in the other thread. At some point I may go through and add thinwall PVC, CPVC, ABS, and perhaps even copper. Of course, at that point it would be difficult to find what you're comparing, although those materials are more common when experimenting with seals.

If you're modeling or otherwise designing the layout of a water gun, bear in mind the sizes of fittings. Sizes of fittings are probably more important than the sizes of dozens of different types of tubing, but with complex shapes (such as reducing tees, male-threaded to socket bushings, etc.), labelling could become too complicated. Maybe I could just take the length and width for the fittings for design purposes.

Locked