Hi I'm new here and was looking at fixing my old water gun up for a bit of fun. I have a super soaker cps1500 and it is nearly in working condition.
It is missing the orange cap from the front of the nozzle and the orange bit that sticks up which can change the fire size. It is also missing the washers from the pump mechanism. (i have seen the guide to fixing the pump on isoaker.com so I will probably do that myself.)
I am in New Zealand and i really don't expect anyone to have these lying around anywhere near me, but I am hoping.
looking for cps1500 parts.
- SSCBen
- Posts: 6449
- Joined: Sat Mar 22, 2003 1:00 pm
Re: looking for cps1500 parts.
If you can't find any nozzle selector (what I assume the orange piece you referred to was), consider this modification: http://www.sscentral.org/mods/multi-nozzle.html
It lets you use screw-on nozzles. It's obviously not as convenient as a rotating nozzle selector, but it works nearly as well.
It lets you use screw-on nozzles. It's obviously not as convenient as a rotating nozzle selector, but it works nearly as well.
-
- Posts: 2
- Joined: Fri Jan 02, 2009 9:49 pm
Re: looking for cps1500 parts.
My problem is not that serious it still has the flow selector on it but is missing the plastic housing that usually protects it and the bit of plastic that slides into it to change the flow rate. I may be able to fabricate a poor looking replacement for this bit out of something, maybe wood?
On a different note, what kind of washers are suitable to replace the broken ones in the pump, you can see them in the pictures on this page "http://www.isoaker.com/Armoury/Repair/r ... 0pump.html" unlike that article i still have the plastic screw in washer holder at the end of my pump.
On a different note, what kind of washers are suitable to replace the broken ones in the pump, you can see them in the pictures on this page "http://www.isoaker.com/Armoury/Repair/r ... 0pump.html" unlike that article i still have the plastic screw in washer holder at the end of my pump.