Super Soaker Central

during a water war the trigger broke off
the part for my finger to pull back the rest is still there
if u can help me please explain in detail

fanofbond

armoury

CPS 2500, XP 105, SC 400, CPS 4100 under repair

There goes another one...

Have a look at some threads on this, as well as some repair articles on the site. First, you have to open up the gun. Take out all the screws, and try splitting the pump cap if necessary. Splitting the pump cap can be difficult since it's glued on (well, if it isn't, you can simply pry off the piece), but try to get it all out, and be careful. Now, you need some good glue (preferably gorrilla, no less than epoxy) and something to reinforce it with. Cutting steel strips and aligning them up, then gluing them on is the classic way of repairing the faulty trigger piece, and for good reason.

Welcome aboard! Sorry to hear about your woes.

Yep, read the trigger repair article here at SSC - not in the forums. All the CPS 4100 remakes eventually break, although it took mine a whole year to do so.

Somebody's also replaced the trigger part that you pull with clothes hanger wire or something. At any rate, search the forums if you need more info.

And a few threads below this one, in the repairs forum:
http://forums.sscentral.org/t4246/

would u recomend to add the little metal pieces to the cps 2500 too add strenght to trigger?

fanofbond

armory

cps 2500, cps 4100 under repair, xp105, sc 400

The CPS 2500 has a strong enough trigger. You can reinforce it if you want, but the "recent" CPS 4100s are by far the most notorious.

Good luck with the repair!