Page 1 of 1
I need help to repair a water gun.
Posted: Sat Apr 14, 2007 2:33 am
by JCSoaker
Hello,
I was wondering which store can give these services. Apparently I cannot fix my cps 4100 without external professional help.
Anyone knowledgable enough of any stores in Canada which can give these services?
Thanks.
Posted: Sat Apr 14, 2007 3:13 am
by C-A_99
How about providing us the service of telling what the problem is so we can help you? Just get a screwdriver, epoxy, whatever, and you can probably repair it yourself. I don't think stores will do it, though they'll probably provide a (very probably inferior) replacement.
Posted: Sat Apr 14, 2007 7:55 am
by JCSoaker
Read the thread-
Crazy Finger Force. CPS 4100 Dead.
Try cutting a slit right through the center of the piece, so it can seperate with the rest of the frame. For the trigger, try cutting some metal pieces and gluing it to the sides of the piece. Here's a pic on a 2100 trigger repair I made. So far it's holding up fairly well. Gorrilla glue was used to repair this.
It's the Gorrilla glue you mentioned. I am going to have to clamp it for 24-48 hours, and I don't have the resources or the professional experience to do that because the trigger section is very delicate and there is almost no way to clamp it even if I had a clamp.
I need a source of pressure to do that, and the metal sheets you mentioned I coulnd't find them at home depot.
I want to know
excactly what I need to fix the trigger
Thanks.