Page 3 of 3

Re: Typo and broken link reports

Posted: Thu Feb 07, 2008 11:51 am
by sbell25
No problem. I have too much time on my hands at the moment. ;)

Here's another typo, in the "Introduction to water guns" page:
The gun can in two versions.

Re: Typo and broken link reports

Posted: Thu Feb 07, 2008 10:13 pm
by Silence
Thanks, I fixed that one too. I actually don't remember seeing that typo when I read the article.

You're really flying through all the new content. You've probably read more than I have. :p

Re: Typo and broken link reports

Posted: Tue Mar 16, 2010 3:12 am
by SSCBen
soakernerd mentioned some broken links here: http://forums.sscentral.org/49826-post5.html

Tomorrow I'll switch the links to point to the Internet Archive.

Re: Typo and broken link reports

Posted: Tue Mar 16, 2010 4:03 pm
by soakernerd
Still, at least one attempt has been made to emulate a rotary nozzle selector using a rotary Nerf gun turret. However, results were fairly unimpressive due to the amount of leakage. A strong spring or bolt connection between the water gun and the nozzle selector is essential for maintaining the seal.
The bold is a link. however, it takes you to the homemades FAQ, which is where i found it.

Re: Typo and broken link reports

Posted: Mon Mar 22, 2010 11:19 pm
by SSCBen
soakernerd, please post a URL along with the quote in the future.

Here's a spot with two broken links (in bold) here: http://www.sscentral.org/faq/general.html#54
Where can I buy replacement parts?

Hasbro sells some replacement parts, however, many older parts are no longer available. If a part you need part is no longer available, ask at our forums.
Where can I buy water guns?

Hasbro's Super Soaker has a "where to buy" page. Water Warriors water guns by Buzz Bee Toys can be bought usually where Super Soakers can be, K-mart, and CVS.
I'll take care of these in one sitting when I have more free time. It'll be more time efficient. If another admin beats me to it, that's great.

Re: Typo and broken link reports

Posted: Wed Apr 21, 2010 1:21 am
by martianshark
There's a piece of outdated information on the "How Water Guns Work" page saying that the only modern spring powered water gun is the Splat Blaster. Today, there's also the Steady Stream, Quick Blast, Pulse series, etc.

Re: Typo and broken link reports

Posted: Thu May 20, 2010 1:41 am
by zeda.beta
The aph page has two links that no longer should be included. They are the SSC store links, listed in bold below.
If you are interested in building an APH, these pages are for you. If you feel that you are unable to build an APH but would still like to own one, consider buying one from the SSC Store. If you want an APH in kit form, you also can buy one from the SSC Store.
-Zeda

Re: Typo and broken link reports

Posted: Sat May 29, 2010 4:40 am
by Silence
Thanks for the above two corrections. :cool:

Re: Typo and broken link reports

Posted: Tue Oct 05, 2010 9:16 pm
by SEAL
In 2004, the CEO of Buzz Bee Toys who make the Water Warriors line of water guns asked hobbyist if they would be interested in a high powered water gun that would sell at sporting good stores to an older audience.
Taken from the Introduction to Water Gunspage. There should be an "S" at the end of "Hobbyist".

I would also like to know if this is true or not. If it is, then how come they haven't started making high powered water guns? I'm sure all the hobbyists would have said yes, right? I know I would have.

Re: Typo and broken link reports

Posted: Wed Oct 06, 2010 1:00 am
by C-A_99
That typo is just the start of the issues on that article. I'm currently going through and updating some sorely outdated information, but I'd rather have Ben go through and clean it up/verify some things. In particular, I disagree with the emphasis on shelf space issues, especially with the addition of the Hydroblitz and that retailers were willing to carry them. I think design team incompetence is the main issue here, and the reasons are as follows.

When Larami was completely absorbed, many of their best engineers left and went to BBT. I don't think the reasons for this are clear, but when you go from Max-D and CPS 2100 to the EES, its obvious that there has not only been a shift at marketing direction, but also on the design teams. While Hasbro's design team improved slightly afterwards, they simply never got the gist of what makes a good water gun, and what makes them sell. Larami knew just how to make good water guns and they definitely sold very well in their time, while Hasbro experimented with bad gimmicks and designs like the Arctic Shock. The Arctic Shock showed that gimmicks can sell but only for the short term as people trash theirs once they find out that it's a piece of crap compared to the Flash Flood, which was legitimately popular and well-liked. However, the fact that FF triggers were breaking left and right must not have helped for SS's popularity very much. And I don't think I even need to get started on the Oozinator; the reasons Hasbro came up with it and the reason it was such a huge flop are all glaringly obvious.

Enter the Hydroblitz. Hasbro is still experimenting with gimmicks, but this time on a large sale. It flopped too when stores and Hasbro alike were flabberghasted at the concept that no one would want to pay $40 for an oversized underpowered blaster. If it was a re-release of the Monster instead, it might have sold better and definitely be worth the money.

I think too many people have the misconception that gimmicks are effective and that's why Hasbro went towards that approach. Gimmicks only work for the short term and eventually you need a new one. Hasbro truly turned the water gun into a buy-and-consume product to be bought, used for one summer, tossed into the garage, and tossed out in the garbage, not necessarily by spending less money on material quality, but by spending less on their design/ideas/marketing teams. The Hydroblitz and Oozinator failures must have costed them a good amount of money, whereas if they continued selling the same old CPS's in new cases, they'd be less likely to have such problems. A CPS 1000 takes as much shelf space as some Nerf guns and BBT's, and a 2500 may take 1.5 times as much. (About as much space as a Nerf Longshot takes) But when they all sell well, it really does not matter that much; if shelves are constantly getting emptied savagely by eager consumers, then all the better!

To further my point on design/marketing incompetence, just look at what happened later on around '08 to '09. The SS brand was nothing but re-releases, then they handed it over to Nerf for 2010. They made blasters more useful as props or to mod into Nerf guns than for any possible water warfare use. Hasbro really does not give a crap about the SS brand as it has treated it as a little sideline all these years and not given anything to it while they work on huge Nerf projects, pumping out all sorts of battery powered novelties and accessories. When was the last time you saw a vest for holding water refill bottles? When was the last time a SS had a strap other than the Hydroblitz? That's right, BBT has been picking up all their slack and Hasbro is basically handing the market to them. There are two reasons the water gun market isn't that profitable; one is because Hasbro has treated it as a nearly worthless commodity, and two, that treatment has lead consumers to also treat them as such. They are not treated as toys people value anymore.

I'll just make a few basic corrections for now, but honestly most of the article needs re-writing to be up to date.