Super Soaker Central forums

HappyDappy · 05-18-2004, 09:37 PM

thanks to all for help on max d 6000

anyway
I know that cps 4100 trigger brakes easily

mine just did

please help any one

maybe there's articles about it

the trigger is atached to a big internal orange ring thing that is pulled back
this still works just that no water comes out

BlueSmudge · 05-18-2004, 11:43 PM

does it act like a piston soaker when you pump it? making water come out with out our use of triger?

Ben · 05-19-2004, 04:46 AM

I'm not exactly sure what he means, but is this the problem?

RacerSoaker445 · 05-19-2004, 08:46 AM

Quote:

the trigger is atached to a big internal orange ring thing that is pulled back
this still works just that no water comes out

It Sounds like a Trigger valve problem. Does the thing look like this?

This might be another repair: Here

BlueSmudge · 05-19-2004, 03:28 PM

this happened to my friends 1200 if I think it is what it is. from the orange ring there is another wire that connects to the trigger valve right? I had to glue that in place. Mine was just sliding in and out of its hole, and not opening the valve. Actualy it wasn't closing it, but its a problem either way.

HappyDappy · 05-19-2004, 04:53 PM

I fixed it

racersoaker445 hit the mark with the second article he showed me so thanks

turns out that it was the "too much pressure in the pc" problem
I over pumped it so that the trigger wasn't strong enugh to pull valve back
so I opened it up and pulled the valve myself

I was doing this in the kitchen and water blew everywhere

anyways
thanks all for helping

Neuro · 05-19-2004, 06:43 PM

I had the same problem with my cps 2500 - then I pulled the trigger too hard and it snapped. ergh.

RacerSoaker445 · 05-19-2004, 07:06 PM

Your welcome.

Racer

BlueSmudge · 05-20-2004, 12:18 AM

its not like he wrote the artical. I think you should be thanking doom really. By the way, everyone should probabl ycheck the repair section before coming to the forums, it would save us some time. B)

05-18-2004, 09:37 PM	#1
HappyDappy Member Join Date: May 2004 Posts: 30 UserID: 114	Cps 4100 Broken Trigger thanks to all for help on max d 6000 anyway I know that cps 4100 trigger brakes easily mine just did please help any one maybe there's articles about it the trigger is atached to a big internal orange ring thing that is pulled back this still works just that no water comes out

05-18-2004, 11:43 PM	#2
BlueSmudge Senior Member Join Date: Apr 2004 Posts: 886 UserID: 97	does it act like a piston soaker when you pump it? making water come out with out our use of triger? __________________ -------------------------------------------------------------- BlueSoak.net --------------------------------------------------------------

05-19-2004, 04:46 AM	#3
Ben Founder Join Date: Mar 2003 Location: College Park, Maryland Posts: 6,016 UserID: 1	I'm not exactly sure what he means, but is this the problem? __________________ Note: I am busy so if I am slow to respond, be patient. email: ben at sscentral dot org / Forum rules / Read this page before emailing me. Do not send me a PM or email with a water gun question if someone else could answer the question. Post at the forums. You will get a response from me along with others' views or ideas. Do not send me a PM or email about reading a certain post unless it's been a few days since you've posted. I try to read every post but do miss some.

05-19-2004, 03:28 PM	#5
BlueSmudge Senior Member Join Date: Apr 2004 Posts: 886 UserID: 97	this happened to my friends 1200 if I think it is what it is. from the orange ring there is another wire that connects to the trigger valve right? I had to glue that in place. Mine was just sliding in and out of its hole, and not opening the valve. Actualy it wasn't closing it, but its a problem either way. __________________ -------------------------------------------------------------- BlueSoak.net --------------------------------------------------------------

05-19-2004, 06:43 PM	#7
Neuro Retired Moderator Join Date: May 2003 Location: Michigan Posts: 1,081 UserID: 30	I had the same problem with my cps 2500 - then I pulled the trigger too hard and it snapped. ergh. __________________ "I used to care, but now I take a pill for that." You can pretty much ignore the times on that, I rarely ever have Xfire on when I play. I should, though.

05-19-2004, 04:53 PM	#6
HappyDappy Member Join Date: May 2004 Posts: 30 UserID: 114	I fixed it racersoaker445 hit the mark with the second article he showed me so thanks turns out that it was the "too much pressure in the pc" problem I over pumped it so that the trigger wasn't strong enugh to pull valve back so I opened it up and pulled the valve myself I was doing this in the kitchen and water blew everywhere anyways thanks all for helping

05-19-2004, 07:06 PM	#8
RacerSoaker445 Still selling stuff. Join Date: Mar 2004 Location: On my tricked out PC Posts: 944 UserID: 83	Your welcome. Racer __________________ WORKING Guns For Sale: CPS 3200, Max-D 5000, WW Glo-Blaster BROKEN Guns For Sale: CPS 1500 + 15 Balloon K-Mod, Flash Flood + 3-layer collossus & PRVD, XXP 175, WW Hornet, SS 50 More info here. Interested? PM me.

05-20-2004, 12:18 AM	#9
BlueSmudge Senior Member Join Date: Apr 2004 Posts: 886 UserID: 97	its not like he wrote the artical. I think you should be thanking doom really. By the way, everyone should probabl ycheck the repair section before coming to the forums, it would save us some time. B) __________________ -------------------------------------------------------------- BlueSoak.net --------------------------------------------------------------

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)