Super Soaker Central forums

used man · 08-10-2008, 03:10 PM

while unfortunately there are no pictures of this amazing piece of water artillary it is so simple none are necessary. walkthrough; WARNING do not use this guide if you are worried about being hit at high speeds with exploding rubber

all you will need is a qfd, duct tape, etape, a dried corn cob or other plug that fits and around 5 feet of large LRT linked to on the super cps page.

preliminary steps if your qfd is in working condition break the auto filling device with something and put a ball valve between the qfd and the hose http://forums.sscentral.org/t4925/

step 1 take the qfd and wrap electricle tape around the outside of the fill tube so the lrt fits over it without to much trouble.

step 2 cut the dried corncob in half and shove it down the end of the lrt.

step 3 cover the plugged end in a good layer of duct tape.

step 4 kink the lrt right behind the corncob and wrap duct tape tightly around the kink.

filling and use

filling -to fill the worm stick the unplugged end over the qfd and get a good grip then turn the water on hold the end that is stuck over the qfd with all of your strength until it starts to bloat. let it get to a sizeble level then kink right in front of the bloat and turn the qfd off then pull the filling end off and get ready to completely drench someone.

firing- there are two ways to fire, firehose where you hold on to the end and direct the shot and shotgun where you hold on farther back and let the nozzle swing around crazilly.

results... one decently filled well aimed shot from around 20 feet away will completely drench one side of someones body and by drench i mean not 1 dry spot on that side of there body...

cantab · 08-10-2008, 03:43 PM

Basically, this is an even more basic version of the 'water worm' weapons that are known.

A better way to plug the end is probably that used in SuperCPS. Basically, shove a bolt, or any plug for that matter, in the end, then use a hoseclamp to hold it on.

Also, it probably wouldn't be that hard to give it a proper valve and nozzle. That would make it somewhat more controllable.

Silence · 08-10-2008, 04:07 PM

Those are simple instructions - good job! I've seen a few threads about plain rubber tubes being used, but I can't seem to find them at the moment.

08-10-2008, 03:10 PM	#1
used man skater of doom Join Date: Apr 2008 Location: seattle washington Posts: 78 UserID: 1520	the worm while unfortunately there are no pictures of this amazing piece of water artillary it is so simple none are necessary. walkthrough; WARNING do not use this guide if you are worried about being hit at high speeds with exploding rubber all you will need is a qfd, duct tape, etape, a dried corn cob or other plug that fits and around 5 feet of large LRT linked to on the super cps page. preliminary steps if your qfd is in working condition break the auto filling device with something and put a ball valve between the qfd and the hose http://forums.sscentral.org/t4925/ step 1 take the qfd and wrap electricle tape around the outside of the fill tube so the lrt fits over it without to much trouble. step 2 cut the dried corncob in half and shove it down the end of the lrt. step 3 cover the plugged end in a good layer of duct tape. step 4 kink the lrt right behind the corncob and wrap duct tape tightly around the kink. filling and use filling -to fill the worm stick the unplugged end over the qfd and get a good grip then turn the water on hold the end that is stuck over the qfd with all of your strength until it starts to bloat. let it get to a sizeble level then kink right in front of the bloat and turn the qfd off then pull the filling end off and get ready to completely drench someone. firing- there are two ways to fire, firehose where you hold on to the end and direct the shot and shotgun where you hold on farther back and let the nozzle swing around crazilly. results... one decently filled well aimed shot from around 20 feet away will completely drench one side of someones body and by drench i mean not 1 dry spot on that side of there body... __________________ "dont mess with used man!"-sloganizer.net thanks to dx for link to website

08-10-2008, 03:43 PM	#2
cantab Senior Member Join Date: Oct 2007 Location: England Posts: 538 UserID: 1400	Re: the worm Basically, this is an even more basic version of the 'water worm' weapons that are known. A better way to plug the end is probably that used in SuperCPS. Basically, shove a bolt, or any plug for that matter, in the end, then use a hoseclamp to hold it on. Also, it probably wouldn't be that hard to give it a proper valve and nozzle. That would make it somewhat more controllable. __________________ Arsenal: 2x XP 220, Arctic Blast M(odded), Aquashock Secret Strike M, CPS1200, CPS 2100, SC Power Pak, XP 215, Liquidator, Sting Ray M, Argon M, Tiger Shark, Shark, Jet, Storm 500, Shield Blaster 2000, Waterbolt, The Blaster, 3l garden sprayer M, 1l sprayer, cheap PR gun, backpack piston pumper (broken, again), 3l aquapack, 1.5l aquapack, 10l water carrier.

08-10-2008, 04:07 PM	#3
Silence Administrator Join Date: Apr 2006 Location: Virginia Posts: 3,293 UserID: 576	Re: the worm Those are simple instructions - good job! I've seen a few threads about plain rubber tubes being used, but I can't seem to find them at the moment. __________________ Forum rules

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)