Super Soaker Central forums

waterwarman · 08-03-2007, 11:56 PM

i need some advice for my super soaker max infusion defender. The reason why im asked its based on pressurized and power. So some people please help me out.

C-A_99 · 08-04-2007, 01:29 PM

Hmm, it looks like the only effective power mod for this would be a nozzle drill. You can try disabling the pressure relief valve (PRV), but that requires opening of the gun. While a nozzle drill would lower it's already low shot time even more, I've heard that you can get some pretty good range with it. As for how deep to drill and how big, I'm not sure since I've never owned one. (DX could probably help here)

A non-modding method of improving power is simply pumping in extra air before pumping water. Open up the reservoir and look for the intake/intake tube. (most likely it's just an intake, which appears as a little hole in the reservoir) Now, to pump air in, just make sure that intake is exposed to air instead of water while pumping, then pump in water. (if there's water in the reservoir, invert the gun to pump in air) You only need to do this once unless you shoot out all the extra air.

DX · 08-04-2007, 08:10 PM

Drilling 1/3 of the way down the nozzle gets you close to optimal range. You'd be surprised how far it can shoot, but the shot time gets halved. Remember, when the output is increased, you'll be able to shoot for less time and the reservoir will fly by. Modding is always a balance, improve x at the expense of y.

08-03-2007, 11:56 PM	#1
waterwarman A Water War Warrior Join Date: Jul 2007 Location: Pennsyvailla Posts: 7 UserID: 1334	Need mod help for a super soaker max infustion defender i need some advice for my super soaker max infusion defender. The reason why im asked its based on pressurized and power. So some people please help me out. __________________ U Must Learn the ways of the water

08-04-2007, 01:29 PM	#2
C-A_99 Senior Member Join Date: Aug 2006 Location: MI, US Posts: 470 UserID: 809	Hmm, it looks like the only effective power mod for this would be a nozzle drill. You can try disabling the pressure relief valve (PRV), but that requires opening of the gun. While a nozzle drill would lower it's already low shot time even more, I've heard that you can get some pretty good range with it. As for how deep to drill and how big, I'm not sure since I've never owned one. (DX could probably help here) A non-modding method of improving power is simply pumping in extra air before pumping water. Open up the reservoir and look for the intake/intake tube. (most likely it's just an intake, which appears as a little hole in the reservoir) Now, to pump air in, just make sure that intake is exposed to air instead of water while pumping, then pump in water. (if there's water in the reservoir, invert the gun to pump in air) You only need to do this once unless you shoot out all the extra air. __________________ http://hbww.fateback.com/index.html Website w/ info on teams, armory, etc.

08-04-2007, 08:10 PM	#3
DX Wicked Super Admin Join Date: Feb 2004 Location: Easton / New London, CT Posts: 1,576 UserID: 75	Drilling 1/3 of the way down the nozzle gets you close to optimal range. You'd be surprised how far it can shoot, but the shot time gets halved. Remember, when the output is increased, you'll be able to shoot for less time and the reservoir will fly by. Modding is always a balance, improve x at the expense of y. __________________ Mess With the Best, Get Soaked Like the Rest!! 2004 Red Sox - World Series Champions 2007 RED SOX - WORLD SERIES CHAMPIONS! 2003 Patriots - Super Bowl Champions 2004 Patriots - Super Bowl Champions 2007 Patriots - God Damnit! If I change my sig, will the world end?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)