Super Soaker Central forums

mchaos · 07-05-2007, 11:34 PM

I got the bladder tanks for 23 cents a piece, but normally they are like $50 a piece. You can get them from around $35 to $50 if you look around. Any place that sells plumbing parts will have them. I got mine at lowes, they were clearanced. Last 2. I got lucky. you can get a 5 gallon bladder tank for around $70, so if you want to save some $$ you can go a little bigger, because its gonna cost around $100 to get 2 2 gallon tanks.

Ben · 07-07-2007, 08:24 AM

Very interesting! I was wondering who'd be the next person to get water outputs over 100X.

I've never seen these chambers used before, so I'll have to add a page on our website about them. Would you mind if we used your pictures?

mchaos · 07-08-2007, 12:50 AM

Sure!

Wait until I finish it. i am working on the gun/nozzle right now. I bought some pvc and fittings, and am working out a home made high volume valve.

More pics to come..

soak master 2000 · 07-08-2007, 10:42 AM

how mutch does it weigh? water weighs about 8 pounds per gallon so yours should weigh 32 pounds
also can you make a video of the 1/4 barb

mchaos · 07-09-2007, 10:57 AM

The rig doesn't weigh that much empty. It prolly weighs about that full.

there is a clip that shows it for a second lol. I suppose I could put it together for a clip of the 1/4 barb.

I am reworking some things. When the gun is done, I am using a 3/16 barb. I want maximum blast time with it.

Silence · 07-09-2007, 02:45 PM

The tanks aren't completely filled with water. You could figure out how full it becomes, based on the hose pressure and the pressure of the bladder, but we don't know those figures anyway. Regardless, the tank is probably 1/3-2/3 full, so there's not as much weight or output as you'd think.

3/16" barbs are probably too small to get maximum range. I'd look for something between 1/4" and 3/8" in diameter - and remember the inner diameter of the barb is going to be smaller than whatever is marked, as the marking designates the approximate outer diameter.

mchaos · 07-09-2007, 11:16 PM

well where ever it fills too its max full Hey, that's funny!. But its a small sliver of space at the top of the tanks where the air is. Its not much. On a larger tank, this space would be bigger, but in these small tanks its not. You can hear the bladder pressing against the contours of the tanks. you can feel it too, it stops right at the top.

I under stand how the fittings work. The problem is that this thing exhausts its water supply very quickly even with a 1/4" barb. I know the rang will probably suffer, But I am working on a way to have multiple selections on nozzles too. I want to be able to switch to a 1/2 barb for that ultimate blast once in range LoL. Its prolly just going to be off of a T at the back of the gun that comes up a long under the gun with a ball valve. I Don't need a fancy firing mechanism for it.

mchaos · 07-16-2007, 08:31 PM

I made a new video of my creation with a 3/16th barb on it. I get about a minute and a half of continuous stream.

From the vid you can see it has quite a bit of force, and its loud hitting the tub surround. The stream is strong, and it gets the same range as the 1/4" barb, but it lasts longer.

Needless to say, my bathroom got a bit wet even though I was spraying into the tub.

http://media.putfile.com/water-cannon-test

Edit:

I just noticed in watching the vid, in the beginning you can see the TP moving due to the air created by the stream of water. there was a pretty good breeze in the bathroom with that thing going.

soak master 2000 · 08-05-2007, 12:31 PM

Looks pretty good. I found a website that has bladder tanks. http://www.windtrax.com/search_resul...&btnSearch.y=4

Dasstrooper · 09-02-2007, 12:38 AM

They make tanks like tis that can hold 100 gallons

you obviously couldn't make it very portable, but once your setup you could spray down an army with just one gigantic tank. If anyone is familiar with the band GWAR ,I'm pretty sure this is what they use to power their blood cannons.

07-07-2007, 08:24 AM	#17
Ben Founder Join Date: Mar 2003 Location: Maryland Posts: 5,974 UserID: 1	Very interesting! I was wondering who'd be the next person to get water outputs over 100X. I've never seen these chambers used before, so I'll have to add a page on our website about them. Would you mind if we used your pictures? __________________ email: ben at sscentral dot org / Forum rules Read this page before emailing me. Do not send me a PM or email with a water gun question if someone else could answer the question. Post at the forums. You will get a response from me along with others' views or ideas. Do not send me a PM or email about reading a certain post unless it's been a few days since you've posted. I try to read every post.

07-08-2007, 10:42 AM	#19
soak master 2000 Junior member Join Date: Jun 2007 Posts: 17 UserID: 1243	how mutch does it weigh? water weighs about 8 pounds per gallon so yours should weigh 32 pounds also can you make a video of the 1/4 barb __________________ FAREWELL, TILL YOU SOAK AGAIN Last edited by soak master 2000 : 07-08-2007 at 10:49 AM.

07-09-2007, 02:45 PM	#21
Silence Administrator Join Date: Apr 2006 Location: Virginia Posts: 3,246 UserID: 576	The tanks aren't completely filled with water. You could figure out how full it becomes, based on the hose pressure and the pressure of the bladder, but we don't know those figures anyway. Regardless, the tank is probably 1/3-2/3 full, so there's not as much weight or output as you'd think. 3/16" barbs are probably too small to get maximum range. I'd look for something between 1/4" and 3/8" in diameter - and remember the inner diameter of the barb is going to be smaller than whatever is marked, as the marking designates the approximate outer diameter. __________________ Forum Rules

07-09-2007, 11:16 PM	#22
mchaos Junior member Join Date: Jul 2007 Posts: 15 UserID: 1259	well where ever it fills too its max full Hey, that's funny!. But its a small sliver of space at the top of the tanks where the air is. Its not much. On a larger tank, this space would be bigger, but in these small tanks its not. You can hear the bladder pressing against the contours of the tanks. you can feel it too, it stops right at the top. I under stand how the fittings work. The problem is that this thing exhausts its water supply very quickly even with a 1/4" barb. I know the rang will probably suffer, But I am working on a way to have multiple selections on nozzles too. I want to be able to switch to a 1/2 barb for that ultimate blast once in range LoL. Its prolly just going to be off of a T at the back of the gun that comes up a long under the gun with a ball valve. I Don't need a fancy firing mechanism for it. Last edited by mchaos : 07-09-2007 at 11:23 PM.

07-16-2007, 08:31 PM	#23
mchaos Junior member Join Date: Jul 2007 Posts: 15 UserID: 1259	NEW VIDEO. 3/16" barb. I made a new video of my creation with a 3/16th barb on it. I get about a minute and a half of continuous stream. From the vid you can see it has quite a bit of force, and its loud hitting the tub surround. The stream is strong, and it gets the same range as the 1/4" barb, but it lasts longer. Needless to say, my bathroom got a bit wet even though I was spraying into the tub. http://media.putfile.com/water-cannon-test Edit: I just noticed in watching the vid, in the beginning you can see the TP moving due to the air created by the stream of water. there was a pretty good breeze in the bathroom with that thing going.

07-05-2007, 11:34 PM	#16
mchaos Junior member Join Date: Jul 2007 Posts: 15 UserID: 1259	I got the bladder tanks for 23 cents a piece, but normally they are like $50 a piece. You can get them from around $35 to $50 if you look around. Any place that sells plumbing parts will have them. I got mine at lowes, they were clearanced. Last 2. I got lucky. you can get a 5 gallon bladder tank for around $70, so if you want to save some $$ you can go a little bigger, because its gonna cost around $100 to get 2 2 gallon tanks.

07-08-2007, 12:50 AM	#18
mchaos Junior member Join Date: Jul 2007 Posts: 15 UserID: 1259	Sure! Wait until I finish it. i am working on the gun/nozzle right now. I bought some pvc and fittings, and am working out a home made high volume valve. More pics to come..

07-09-2007, 10:57 AM	#20
mchaos Junior member Join Date: Jul 2007 Posts: 15 UserID: 1259	The rig doesn't weigh that much empty. It prolly weighs about that full. there is a clip that shows it for a second lol. I suppose I could put it together for a clip of the 1/4 barb. I am reworking some things. When the gun is done, I am using a 3/16 barb. I want maximum blast time with it.

08-05-2007, 12:31 PM	#24
soak master 2000 Junior member Join Date: Jun 2007 Posts: 17 UserID: 1243	Looks pretty good. I found a website that has bladder tanks. http://www.windtrax.com/search_resul...&btnSearch.y=4 __________________ FAREWELL, TILL YOU SOAK AGAIN

09-02-2007, 12:38 AM	#25
Dasstrooper Junior member Join Date: Aug 2007 Posts: 1 UserID: 1350	They make tanks like tis that can hold 100 gallons you obviously couldn't make it very portable, but once your setup you could spray down an army with just one gigantic tank. If anyone is familiar with the band GWAR ,I'm pretty sure this is what they use to power their blood cannons.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)