Super Soaker Central forums

juggle21 · 05-28-2007, 11:23 AM

some kid had snapped the pump off my gun and i need to get the gun open to fix it. anybody know how to get the orange part thats the nozzle off of the front of the gun? its pretty old so I am hoping to fix any leaks it has. also what ae some good ways to fix the pump?

Silence · 05-28-2007, 01:52 PM

Welcome to the forums, and good luck with your repair!

For the pump, you could slide a rod inside each half of the old rod (since it broke). Or just replace the the old rod with a wooden dowel.

I don't think you need to take off the nozzle - and it'll be very hard to do. There's probably another screw somewhere or a different piece that has been glued on in an attempt to stop people trying to open the case.

But I might be wrong. Pictures might also help if necessary.

JLspacemarine · 05-28-2007, 06:32 PM

Unless there's damage inside the gun, you don't need to open it. Just look if the orange pump cap can be unscrewed. It is possible to do this on the 1500 and the 1700 as well I think. I've been able to improve the seals and reinforce the pump on my 1500 without taking the whole gun apart(as well as doing a light k-mod, but that's another story

). You should be able to do so to replace or repair the pump.

Avoid removing the nozzle unless you don't care about breaking it, because snapping it off is the only way I know.

juggle21 · 05-29-2007, 09:20 PM

hey thanks ill try it, and ill see if i can get pictures up

05-28-2007, 11:23 AM	#1
juggle21 Junior member Join Date: May 2007 Posts: 2 UserID: 1139	taking apart a cps 1700 some kid had snapped the pump off my gun and i need to get the gun open to fix it. anybody know how to get the orange part thats the nozzle off of the front of the gun? its pretty old so I am hoping to fix any leaks it has. also what ae some good ways to fix the pump?

05-28-2007, 01:52 PM	#2
Silence Administrator Join Date: Apr 2006 Location: Virginia Posts: 3,293 UserID: 576	Welcome to the forums, and good luck with your repair! For the pump, you could slide a rod inside each half of the old rod (since it broke). Or just replace the the old rod with a wooden dowel. I don't think you need to take off the nozzle - and it'll be very hard to do. There's probably another screw somewhere or a different piece that has been glued on in an attempt to stop people trying to open the case. But I might be wrong. Pictures might also help if necessary. __________________ Forum rules

05-28-2007, 06:32 PM	#3
JLspacemarine Senior Member Join Date: Jun 2006 Location: Québec, Canada Posts: 105 UserID: 752	Unless there's damage inside the gun, you don't need to open it. Just look if the orange pump cap can be unscrewed. It is possible to do this on the 1500 and the 1700 as well I think. I've been able to improve the seals and reinforce the pump on my 1500 without taking the whole gun apart(as well as doing a light k-mod, but that's another story ). You should be able to do so to replace or repair the pump. Avoid removing the nozzle unless you don't care about breaking it, because snapping it off is the only way I know. __________________ Armory: AS Hydroblitz (x2), MI FlashFlood, STE TripleShot, XP Backfire, XP 215, XP 105, XXP 175, Big Bottle BLaster(x2), SC Power Pak, SpeedLoader1000, SpeedLoader 1500, SpeedLoader Double-Cross 3000, CPS Splashzooka (x2), CPS 1200, CPS 1500, CPS 2000 Mk2, CPS 2100 Last edited by JLspacemarine : 05-28-2007 at 11:32 PM.

05-29-2007, 09:20 PM	#4
juggle21 Junior member Join Date: May 2007 Posts: 2 UserID: 1139	cps 1700 hey thanks ill try it, and ill see if i can get pictures up

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)