Super Soaker Central forums

Nate · 06-07-2006, 01:49 PM

First idea I came up with. I based it off of one I already have, but it's leaking. Anyway, here it is: http://www.maj.com/gallery/Nate2/Rokenbok/design.bmp

There ya go. Criticize all you want, no matter what it is, it helps me out.

Silence · 06-07-2006, 02:06 PM

Nice to see you used PVC Designer.

I presume you've read the HowStuffWorks Water Blasters article, but if you haven't done so yet, you should now. Generally, the flow of a soaker goes, "reservoir -> 1st check valve -> pump -> 2nd check valve -> pressure chamber (PC) -> trigger -> nozzle." I don't see how or where the pressure is created, because it appear to be missing one of the check valves and the pump. Do you put the pump in the backpack or use some other revolutionary design? If so, then elaboration would help on my part

.

Nate · 06-07-2006, 02:20 PM

I knew someone would ask that. The smaller caps, between the tubes and the upper caps, go inside, filled with something sort of heavy. That's all like an exploded view. That pushes down on the water, keeping pressure. That's how the backpack one that I have works. At the 4 way crossing, the top has a cap (on a check valve) that would have a hose spout for filling. The bottom is just a handle.

Big Boss · 06-07-2006, 04:29 PM

Something heavy? Maybe springs would work. Although for any reliability, they'd have to be fairly large guage springs. And even then, I don't know what kind of pressure that'd create against liquids.

Silence · 06-07-2006, 04:37 PM

I see what you're saying now, and I was going to ask about the smaller caps, but I don't think you realize exactly how much force is stored inside powerful homemade soakers. We're talking about so much force that you have to stop pumping a 1/2" pump--and if these are 3" tubes or something, there's no way you could get force. Also, once you managed to lift the weights and fill the reservoir/PC, you'd have to carry the entire thing everywhere. If you're thinking about the Power Pak, which does have three tubes as a backpack and a gun without a pressure chamber, then that uses a rubber CPS to constantly apply force.

EDIT: Welcome to Super Soaker Central, Big Boss.

Ben · 06-07-2006, 04:50 PM

Yes, welcome to Super Soaker Central Nate and Big Boss!

Seems that you've got a handle on everything Nate. Since you are basing this off a water gun you have previously made, I am assuming that a weighted gravity-powered water gun was what you previously had made. How well did that work? I've seen old 1800s mining techniques use something similar, but I never thought it would work well enough in a small scale water gun! I might do the math right now to see how much force I could get from a water gun and if I'm not too rusty at my physics, I might be able to get some sort of stream velocity in the end.

The weight would also turn me off, which might be a good reason to use the springs Big Boss sugggested because they can offer more force, albeit less constant force. Air pressure would also provide non-constant force that would be even lighten than springs (and cheaper).

Nate · 06-07-2006, 05:42 PM

I haven't built one before. This is my first design, based off a CPS Super Soaker I already have. Also, the cap at the end of the gun will have a small hole in it for a nozzle. The top of the 4 way connection will have a cap with a faucet fitting on it for filling the gun. I haven't decided on how to tell if it's full or not, though.

Silence · 06-07-2006, 07:08 PM

Sorry, but no Super Soaker implements such a gravity-fed design. In fact, the only backpack CPS soakers are the CPS 3000, the CPS 3200, the SC Big Trouble, the SC Power Pak, and the recent Aquapack Devastator. If you have the SC Power Pak (which is actually a decent weapon), then I wouldn't blame you for thinking that it uses gravity; it has three tubes, and they all have clear parts that show plungers moving up and down. However, they use cylindrical rubber PCs, which exert far more force than weights and with far less mass to carry around.

Of course, you might not even be talking about the SC Power Pak...in which case I'm totally clueless. However, I am certain your method has not been used before.

DX · 06-07-2006, 07:11 PM

He has the Power Pak. And the idea actually might work, if the weights are heavy enough. We shall see...

Lightbulb41 · 06-07-2006, 07:40 PM

I think he would best go for a spring driven system due to the massive weights on that thing would take to put out alot of pressure. I used to have power pack which I modded to hook directly to a hose

Big problem away from a hose though. It was a good gun until the seals went and sprayed everyone.

06-07-2006, 01:49 PM	#1
Nate Junior member Join Date: Jun 2006 Posts: 14 UserID: 690	Backpack gun design First idea I came up with. I based it off of one I already have, but it's leaking. Anyway, here it is: http://www.maj.com/gallery/Nate2/Rokenbok/design.bmp There ya go. Criticize all you want, no matter what it is, it helps me out.

06-07-2006, 02:06 PM	#2
Silence Administrator Join Date: Apr 2006 Location: Virginia Posts: 3,244 UserID: 576	Nice to see you used PVC Designer. I presume you've read the HowStuffWorks Water Blasters article, but if you haven't done so yet, you should now. Generally, the flow of a soaker goes, "reservoir -> 1st check valve -> pump -> 2nd check valve -> pressure chamber (PC) -> trigger -> nozzle." I don't see how or where the pressure is created, because it appear to be missing one of the check valves and the pump. Do you put the pump in the backpack or use some other revolutionary design? If so, then elaboration would help on my part . __________________ Forum Rules

06-07-2006, 04:37 PM	#5
Silence Administrator Join Date: Apr 2006 Location: Virginia Posts: 3,244 UserID: 576	I see what you're saying now, and I was going to ask about the smaller caps, but I don't think you realize exactly how much force is stored inside powerful homemade soakers. We're talking about so much force that you have to stop pumping a 1/2" pump--and if these are 3" tubes or something, there's no way you could get force. Also, once you managed to lift the weights and fill the reservoir/PC, you'd have to carry the entire thing everywhere. If you're thinking about the Power Pak, which does have three tubes as a backpack and a gun without a pressure chamber, then that uses a rubber CPS to constantly apply force. EDIT: Welcome to Super Soaker Central, Big Boss. __________________ Forum Rules

06-07-2006, 04:50 PM	#6
Ben Founder Join Date: Mar 2003 Location: Maryland Posts: 5,955 UserID: 1	Yes, welcome to Super Soaker Central Nate and Big Boss! Seems that you've got a handle on everything Nate. Since you are basing this off a water gun you have previously made, I am assuming that a weighted gravity-powered water gun was what you previously had made. How well did that work? I've seen old 1800s mining techniques use something similar, but I never thought it would work well enough in a small scale water gun! I might do the math right now to see how much force I could get from a water gun and if I'm not too rusty at my physics, I might be able to get some sort of stream velocity in the end. The weight would also turn me off, which might be a good reason to use the springs Big Boss sugggested because they can offer more force, albeit less constant force. Air pressure would also provide non-constant force that would be even lighten than springs (and cheaper). __________________ email: ben at sscentral dot org / Forum rules Read this page before emailing me. Do not send me a PM or email with a question if someone else could answer the question. Post at the forums so others could offer their take. Do not send me a PM or email about reading a certain post unless it's been a few days since you've posted. I try to read every post.

06-07-2006, 05:42 PM	#7
Nate Junior member Join Date: Jun 2006 Posts: 14 UserID: 690	I haven't built one before. This is my first design, based off a CPS Super Soaker I already have. Also, the cap at the end of the gun will have a small hole in it for a nozzle. The top of the 4 way connection will have a cap with a faucet fitting on it for filling the gun. I haven't decided on how to tell if it's full or not, though. Last edited by Nate : 06-07-2006 at 05:48 PM.

06-07-2006, 02:20 PM	#3
Nate Junior member Join Date: Jun 2006 Posts: 14 UserID: 690	I knew someone would ask that. The smaller caps, between the tubes and the upper caps, go inside, filled with something sort of heavy. That's all like an exploded view. That pushes down on the water, keeping pressure. That's how the backpack one that I have works. At the 4 way crossing, the top has a cap (on a check valve) that would have a hose spout for filling. The bottom is just a handle.

06-07-2006, 04:29 PM	#4
Big Boss Junior member Join Date: Jun 2006 Posts: 16 UserID: 691	Something heavy? Maybe springs would work. Although for any reliability, they'd have to be fairly large guage springs. And even then, I don't know what kind of pressure that'd create against liquids.

06-07-2006, 07:08 PM	#8
Silence Administrator Join Date: Apr 2006 Location: Virginia Posts: 3,244 UserID: 576	Sorry, but no Super Soaker implements such a gravity-fed design. In fact, the only backpack CPS soakers are the CPS 3000, the CPS 3200, the SC Big Trouble, the SC Power Pak, and the recent Aquapack Devastator. If you have the SC Power Pak (which is actually a decent weapon), then I wouldn't blame you for thinking that it uses gravity; it has three tubes, and they all have clear parts that show plungers moving up and down. However, they use cylindrical rubber PCs, which exert far more force than weights and with far less mass to carry around. Of course, you might not even be talking about the SC Power Pak...in which case I'm totally clueless. However, I am certain your method has not been used before. __________________ Forum Rules

06-07-2006, 07:11 PM	#9
DX Wicked Super Admin Join Date: Feb 2004 Location: Easton / New London, CT Posts: 1,574 UserID: 75	He has the Power Pak. And the idea actually might work, if the weights are heavy enough. We shall see... __________________ Mess With the Best, Get Soaked Like the Rest!! 2004 Red Sox - World Series Champions 2007 RED SOX - WORLD SERIES CHAMPIONS! 2003 Patriots - Super Bowl Champions 2004 Patriots - Super Bowl Champions 2007 Patriots - God Damnit!

06-07-2006, 07:40 PM	#10
Lightbulb41 Member Join Date: May 2006 Location: Pittsburgh PA USA Posts: 61 UserID: 664	I think he would best go for a spring driven system due to the massive weights on that thing would take to put out alot of pressure. I used to have power pack which I modded to hook directly to a hose Big problem away from a hose though. It was a good gun until the seals went and sprayed everyone. __________________ You can get more with a kind word and a gun than just a kind word. I trade mobility for firepower. Accuracy for strengh. And Stealth for Intimidation.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)