| |||||||
| Welcome to the SSC Forums! You are currently viewing our boards as a guest which gives you limited access. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and more. Registration is fast, simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact contact us. |
 |
| | Thread Tools |
03-10-2005, 09:07 AM
| #1 |
| Junior member Join Date: Mar 2005
Posts: 3
UserID: 360 |  Hi, I am a newbie here. just thought I would share my fix for a broken valve on an XXP 175 a while ago my xxp 175 stopped working, water would just pour out of the pumping column.  after opening the gun up I realised it was the valve at the end of the pump that was broken. the rubber bit of the valve had come loose. I tried with no success to get this valve fixed however I was unable to do so. after giving up for a bit I had an idea. I took apart a cheap water pistol, the non pressurised kind that cost about £1. this had a simple ball baring valve in its pump. I cut my XXP 175's pump away from the gun half way along its tubing to the rest of the gun. using some plastic tubing which was big enougth to fit the original tubing tightly and epoxy glue I solved the problem. I used the large tubing to connect between the original stuff and the new valve (with lots of glue for good measure), and connected the other end to the original tubing left on the pump, put the gun back together and it worked. I belive this valve actually worked better than the original apologies if this fix has been posted before |
|  |
|
03-10-2005, 09:22 AM
| #2 |
| Back from the dead.  Join Date: Feb 2005 Location: bay area, CA
Posts: 398
UserID: 345 | I've never seen this topic posted before, but I'm a newb to . It was good if not a bit difficult to understand, and can you include photos? |
|
| |
|
03-10-2005, 09:38 AM
| #3 | |
| Junior member Join Date: Mar 2005
Posts: 3
UserID: 360 | Quote:
sorry can't provide photo's as I didn't take any when I did it, and I think the gun has since been stolen(or I can no longer find it), could provide some Sketches tho | |
|
| |
|
03-10-2005, 10:01 AM
| #4 |
| Administrator  Join Date: Feb 2004 Location: UK
Posts: 1,322
UserID: 77 | Welcome to SSCentral. Make sure you've read and understood all the board rules. That includes using a capital letter at the beginning of each sentence.  I don't remember hearing of a fix like this before, or indeed the problem, so well done! It's good that you've been able to fix it by yourself: if more people were that innovative it would be a big bonus to this community.  As hunter pointed out, some images in some from would be nice, if possible.
__________________ ISS: Soaker Sagas Submit your saga and see it up with other titans of water warfare. |
|
| |
|
03-11-2005, 06:29 AM
| #5 |
| Junior member Join Date: Mar 2005
Posts: 3
UserID: 360 | Hi, here are some sketches, there not that great but they should give you that basic idea In addition to what I stated before, I not only the cut super soaker tubing, but also removed a bit so it would be about the same length once the new tubing and valve had been installed. The piping used was clear plastic piping that was slightly stretchy and would fit over the original stuff so that it already made a good seal before epoxy was added. it was slid a couple of centre meters over the original piping before gluing to ensure a good seal and that it held even on the high pressure side. Once I had stuck all this together I covered it in more epoxy just to make sure it was watertight   |
|
| |
|
03-11-2005, 06:04 PM
| #6 |
| Senior Member Join Date: Aug 2004 Location: Springfield ma. which one do the simpsons live in?
Posts: 259
UserID: 288 | Yeah, right those sketches are bad. a lot better than mine! I sort of get what you did, but I'm no tech expert.
__________________ Soak, or be soaked that is the question! |
|
| |
