Build a homemade water gun or water balloon launcher and tell us about it.
-
ShadowSniper
- Posts: 2
- Joined: Fri Jul 15, 2005 11:05 pm
Post
by ShadowSniper » Fri Jul 15, 2005 11:07 pm
I've been pondering and designing this for a while and I thought that maybe you people would like to see it so I registered to post. Here's my concept drawing, pretty self explanatory. If you have any questions comments or suggestions please reply.
http://img.photobucket.com/albums/v346/ ... design.jpg
Edit: Here's a quote from our rules:
Never post images (with the image tag) over 600 pixels in width, or 500 pixels tall. Linking to is acceptable.
Just remember that not everyone had a big monitor or uses a full screen window.
-
SSCBen
- Posts: 6449
- Joined: Sat Mar 22, 2003 1:00 pm
Post
by SSCBen » Sat Jul 16, 2005 12:04 am
Welcome to Super Soaker Central! Aside from the image problem which I already addressed, please capitalize the first words of sentences. After you correct that problem, I will upgrade your account for correctly following our rules. 8)
Is the electronic sprinkler valve necessary? Won't a simple ball valve do? Remember, electronics and water do not mix! Other than that, that design is straightforward and I do not think you will have any problems or disappointments, given that you use a larger diameter tube.
-
ShadowSniper
- Posts: 2
- Joined: Fri Jul 15, 2005 11:05 pm
Post
by ShadowSniper » Sat Jul 16, 2005 3:28 am
Originally posted by Ben@Jul 15 2005, 05:04 PM
Welcome to Super Soaker Central! Aside from the image problem which I already addressed, please capitalize the first words of sentences. After you correct that problem, I will upgrade your account for correctly following our rules. 8)
Is the electronic sprinkler valve necessary? Won't a simple ball valve do? Remember, electronics and water do not mix! Other than that, that design is straightforward and I do not think you will have any problems or disappointments, given that you use a larger diameter tube.
[snapback]25825[/snapback]
Well, I wanted it so that I could push a button and have it so that it wouldn't require me to reach behind my back every time I wanted to fire because that can be costly in a waterfight. Also It's be allot cooler to just push a button and unleash four jets of water at someone. (Reason I'm making this)
I also wanted to say sorry about the image thing, and I'll try to use better grammar whenever I post again.
-
Drenchenator
- Posts: 807
- Joined: Fri Jun 18, 2004 12:00 pm
Post
by Drenchenator » Sat Jul 16, 2005 3:44 am
I wanted it so that I could push a button and have it so that it wouldn't require me to reach behind my back every time I wanted to fire because that can be costly in a waterfight.
The ball valve can be put at the end of a piece of vinyl tubing. So you would not need to reach around.
If you get a threaded ball valve you can attach a tubing barb and a couple PVC attachments to make a multi-nozzle setup, like this:
This setup is what many people use in backpack-only homemades. If you want another example of a nozzle or firing valve setup you can check out
RolandTower's homemade water gun on this site.
The Drenchenator, also known as Lt. Col. Drench.