Go Back   Super Soaker Central > Water gun technology > Modifications
User Name
FAQ Members List Calendar Mark Forums Read

Welcome to the SSC Forums! You are currently viewing our boards as a guest which gives you limited access. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and more. Registration is fast, simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact contact us.
Important note: The SSC forums are now in archive mode. WaterWar.net is the new online discussion board for the water gun hobby.

Thread Tools
Old 04-21-2011, 06:34 PM   #1
Junior member
Join Date: Apr 2011
Posts: 1
UserID: 2430
Default Artic Blast

I drilled a bigger whole where the small nozzle used to be to make a bigger stream, now when i pull the trigger its only a short burst, would i have to increase the size of the tank in order to make the shooting function go back to normal?????
Rigger19 is offline   Reply With Quote
Old 04-21-2011, 06:47 PM   #2
Senior Member
strato_2r5's Avatar
Join Date: Mar 2011
Location: West Coast, USA
Posts: 162
UserID: 2402
Default Re: Artic Blast

I'm no expert, but I think you drilled it too big that it shot out all the contents of the PC in one big blast, like the top trigger. The bigger the output, the less shot time you have. You could just add a PVC end cap drilled to a slightly smaller hole to the small nozzle. However, as I said, I'm no expert, and you should wait 'til a mod posts.
Sorry if I'm not active much, busy on another forum and another project non-soaker related.
strato_2r5 is offline   Reply With Quote
Old 04-21-2011, 08:48 PM   #3
cantab's Avatar
Join Date: Oct 2007
Location: England
Posts: 1,492
UserID: 1400
Default Re: Artic Blast

I'm no expert on it, but here, Ben posted how he expanded the pressure chamber of his Arctic Blast. http://forums.sscentral.org/t4743/
I work on Windows. My toolbox is Linux.
Super Soaker: XP215, 2xXP220, Liquidator, Aquashock Secret Strike M(odded), Arctic Blast M, CPS1200, CPS2100, SC Power Pak, 3l aquapack, 1.5l aquapack
Water Warriors: Jet, Sting Ray M, Shark, Argon M, Tiger Shark, PulseMaster
Others: Waterbolt, The Blaster, Storm 500, Shield Blaster 2000, generic PR gun, generic backpack piston pumper (broken), 3l garden sprayer M, 10l water carrier:
cantab is offline   Reply With Quote
Old 04-23-2011, 12:08 PM   #4
Senior Member
zeda.beta's Avatar
Join Date: May 2009
Location: Crater 5, Moon
Posts: 683
UserID: 1825
Default Re: Artic Blast

The arctic blast has a short pc to begin with, so you'll want to do the PC expansion no matter what you do with the nozzle.

To reduce the size, you should probably fill in part of the hole with epoxy, but make SURE that you don't get any into the area behind the nozzle going back into the tubes.

Alternately you could take apart the gun, fill in the entire nozzle with epoxy, then drill a smaller hole.
I reject your reality and substitute my own.
Quack damn you.
zeda.beta is offline   Reply With Quote

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off

All times are GMT -5. The time now is 03:28 PM.

Powered by vBulletin
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright ©2003 - 2011 The Super Soaker Central project