21k
-
- Posts: 151
- Joined: Thu May 27, 2004 12:00 pm
21k
I just finished K-modding my 2100 (check valve freeze, 60 baloons,valve reinforcement) and the range in HUGE! With three pumps it got 70-75 feet!(25 meters). I highly recamend this mod! The hardest part for me was getting the epoxy off my hands . I think it is also Mk1. Post back with your 21K experences!
-
- Posts: 22
- Joined: Tue Jun 29, 2004 11:25 pm
-
- Posts: 151
- Joined: Thu May 27, 2004 12:00 pm
- Spinner
- Posts: 1337
- Joined: Tue Feb 10, 2004 12:00 pm
- DX
- Posts: 1780
- Joined: Wed Feb 04, 2004 1:00 pm
Did you measure that range? I highly doubt that 70+ ft is possible with a 60 balloon k-mod, even if it is an mk1 21000. My 2 21k's were 68 and 69 balloons with 50-58ft range on 5 pumps, the first had better range, but it was mk1 [might have been mk2, I've forgotten] and the second was mk3. Still, if you insist it was 70 feet, then get some pics up soon!
I also don't think reinforcement would boost range, as you don't even need to reinforce anything on the 2100.
I also don't think reinforcement would boost range, as you don't even need to reinforce anything on the 2100.
Most likely if its got that range-does it have a very pronounced ridge running down the back of the reservoir? If it does, then its either mk1 or mk2, I think screw placement and the internals differentiate between mk1 and mk2. It is easy to identify an mk3 2100, the ridge at the back is very slight. If you have an mk3, Don't bother k-modding it-get an mk1 which will give you more power and range.I think it is also Mk1
Mess With the Best, Get Soaked Like the Rest!
2004 Red Sox - World Series Champions
2007 Red Sox - World Series Champions!
2004 Red Sox - World Series Champions
2007 Red Sox - World Series Champions!
-
- Posts: 89
- Joined: Sun May 09, 2004 12:00 pm
wow! I too would like to see some videos of that sucker shooting! does it have recoil when you shoot it? that would be the best!
http://xs7.xs.to/pics/04512/sig2.jpg
-whoamg, I can't put ANY anime girl in my sig without doom deleting it. =\
-whoamg, I can't put ANY anime girl in my sig without doom deleting it. =\
- wetmonkey442
- Posts: 320
- Joined: Sun Jun 22, 2003 12:00 pm
- SSCBen
- Posts: 6449
- Joined: Sat Mar 22, 2003 1:00 pm
That is beyond impossible. There is no way it could go that far with only 60 balloons and only 3 pumps. All my homemades are more powerful than a hose and they don't go that far. I'd suggest using a measuring tape, not using glycerin and measuring only when there is no wind and on a dry surface such as a road. I always do, and my homemade which must have a CPS chamber a few mms thicker than any K modded gun only get 63 feet max range at the last drop. I strive for accuracy in my measurements, and that is why I use the last large puddle thing, because that is the effective range. It is impossible for only a 60 balloon K mod to do that, but if you insist. I'd still like to see some good evidence like pictures or a remeasurement.Originally posted by Drewsky92@Jul 18 2004, 09:40 PM
I just finished K-modding my 2100 (check valve freeze, 60 baloons,valve reinforcement) and the range in HUGE! With three pumps it got 70-75 feet!(25 meters). I highly recamend this mod! The hardest part for me was getting the epoxy off my hands . I think it is also Mk1. Post back with your 21K experences!
- Dark Elite
- Posts: 217
- Joined: Wed Jul 14, 2004 1:46 pm
I agree with Doom, that just doesn't sound possible. You're saying you can outrange a CPS2000 MK1 with only 3 pumps? not likely. Post a picture and I might believe you.
Visit <span style='font-size:14pt;line-height:100%'><span style='color:red'>Sam's Supercars
<span style='font-size:8pt;line-height:100%'><span style='color range'><span style='font-family:Arial'><u>My Weaponry</u>
CPS2100 (Thank You King Soaker!
1 Liquidator/Pressurizer
1 Max-D 6000
1 XP310 w/my own power mod and 8 balloon XPS mod
2 piston-pistols (backup)
<span style='font-size:8pt;line-height:100%'><span style='color range'><span style='font-family:Arial'><u>My Weaponry</u>
CPS2100 (Thank You King Soaker!
1 Liquidator/Pressurizer
1 Max-D 6000
1 XP310 w/my own power mod and 8 balloon XPS mod
2 piston-pistols (backup)
-
- Posts: 151
- Joined: Thu May 27, 2004 12:00 pm
- RacerSoaker445
- Posts: 951
- Joined: Sun Mar 14, 2004 2:27 pm
- DX
- Posts: 1780
- Joined: Wed Feb 04, 2004 1:00 pm
You don't have to reinforce the internals on the 2100, so don't waste the epoxy.congrats im in the process of modifying my 2100 I already did the chack valve freeze (well I cut off the check valve anyway) im going to reinforce the internals twice over with epoxy and im going to try a experimental technique with k moddding
A new technique? Please post back if it works!
Mess With the Best, Get Soaked Like the Rest!
2004 Red Sox - World Series Champions
2007 Red Sox - World Series Champions!
2004 Red Sox - World Series Champions
2007 Red Sox - World Series Champions!
-
- Posts: 151
- Joined: Thu May 27, 2004 12:00 pm
-
- Posts: 75
- Joined: Mon May 31, 2004 12:00 pm
I don't know what MK I have.
I tried twisting the cap, no luck .MY nozzle seems to be stuck withte casing, while the back of the resoivior has a 3-4 mm ridge sticking out from the back. It's very clear. Is this possibly an MK4?
I tried twisting the cap, no luck .MY nozzle seems to be stuck withte casing, while the back of the resoivior has a 3-4 mm ridge sticking out from the back. It's very clear. Is this possibly an MK4?
<span style='color:red'>Because Hooligans are
1)Useless
2)Pointless
3)Redundant
4)Useless
5)Pointless
6)Redundant
1)Useless
2)Pointless
3)Redundant
4)Useless
5)Pointless
6)Redundant