Hello All,
I just got a CPS 4100 off of ebay. When I took it out and tried it, it started leaking out of the nozzles. I put my finger over the nozzle and the water was pressurized, I think that the firing valve is faulty . Any tips on what to do or how to fix it?
Thanks
CPS 4100 Help!
- SSCBen
- Posts: 6449
- Joined: Sat Mar 22, 2003 1:00 pm
Welcome to SSCentral. Please follow all rules, which means no all caps titles. Thank you.
http://www.sscentral.net/tech/repairs/otvr.php
There you go, it's a common problem. It was on the site btw.
http://www.geocities.com/dryhumper70/Mods.html
There's a picture of the rubber band repair method. I hope this helped.
http://www.sscentral.net/tech/repairs/otvr.php
There you go, it's a common problem. It was on the site btw.
http://www.geocities.com/dryhumper70/Mods.html
There's a picture of the rubber band repair method. I hope this helped.
- ZookaForPrez
- Posts: 49
- Joined: Mon Aug 09, 2004 10:00 pm
I'm pretty sure that on my CPS 4100 by the trigger valve(outside of the case) it says "IMPORTANT: leakage out of nozzle after fireing is normal". Does it leak a lot or just a little flow for a few seconds? Cause if it's just a bit it's normal.
Arsenal:
SplashZooka 65 oz.
CPS 4100
CPS 1200 (soon to get)
Max-D 6000
SplashZooka 65 oz.
CPS 4100
CPS 1200 (soon to get)
Max-D 6000