Threads about water gun modifications.
-
aquafool
- Posts: 30
- Joined: Sun Jun 22, 2003 8:59 pm
Post
by aquafool » Tue Jun 24, 2003 9:32 pm
I have a cps 1-3-5 (my first super soaker) and it kinda sucks. got any ideas on how to modify it into this: :soakem:
-
SSCBen
- Posts: 6449
- Joined: Sat Mar 22, 2003 1:00 pm
Post
by SSCBen » Tue Jun 24, 2003 9:58 pm
Well, I guess that you could drill a bigger nozzle or 1-3-5000 it. Someone else could explain the 1-3-5000 thing, AKA the k mod better than I can.
-
shadowstalker
- Posts: 397
- Joined: Mon May 12, 2003 5:00 pm
Post
by shadowstalker » Tue Jun 24, 2003 10:05 pm
sounds like its time for epoxy and a drill
-
aquafool
- Posts: 30
- Joined: Sun Jun 22, 2003 8:59 pm
Post
by aquafool » Tue Jun 24, 2003 11:36 pm
im afraid that if I drill it I might mess up the soaker :verysad:
-
dsoaker502
- Posts: 36
- Joined: Thu Jun 19, 2003 2:31 pm
Post
by dsoaker502 » Thu Jun 26, 2003 12:35 am
to k mod it, put balloons over the CPS bladder. You should also freeze the check valve, drilling a hole in it and filling that with epoxy. Look around the R&D section, you should find something useful
-
aquafool
- Posts: 30
- Joined: Sun Jun 22, 2003 8:59 pm
Post
by aquafool » Thu Jun 26, 2003 3:36 am
ok, you no what? I Don't know what the heck a check valve or a bladder, or what any of that XPBackfire-esque means :nugget: .
-
SSCBen
- Posts: 6449
- Joined: Sat Mar 22, 2003 1:00 pm
Post
by SSCBen » Thu Jun 26, 2003 10:59 am
How about you buy a soaker better than the 1-3-5.
-
dsoaker502
- Posts: 36
- Joined: Thu Jun 19, 2003 2:31 pm
Post
by dsoaker502 » Thu Jun 26, 2003 3:20 pm
look in the Glossary
-
bomber
- Posts: 25
- Joined: Wed Mar 26, 2003 12:18 am
Post
by bomber » Wed Jul 02, 2003 2:56 am
how about epoxying the holes shut and drilling out the center one?
-
sniper
- Posts: 103
- Joined: Fri Jun 27, 2003 7:45 pm
Post
by sniper » Wed Jul 02, 2003 8:51 pm
it has to have a lot of power to use 5 nosles right? well mod it so it will only use one then you will have a good soaker.......I think
pm me about the historical documints, it has free full games, the legindairy makeshift arsonal with pics, and
many other fine things.
-
Excelite
- Posts: 33
- Joined: Mon Mar 24, 2003 2:36 am
Post
by Excelite » Fri Jul 04, 2003 4:32 am
Plug up or chop off (then plug) the outside nozzles, and drill the middle nozzle to 5x if you can (or replace it entirely with a 5x barrel of some sort. If you do this don't forget a new metal screen!
.
NOT DEAD YET