Monster '01 QFD Leak
- Major McMan
- Posts: 33
- Joined: Wed Jul 16, 2008 8:29 pm
Monster '01 QFD Leak
My Monster has had an annoying leak for quite some time, so tonight I decide to do something about it. I took it apart, pumped it, and saw the leak was coming from three small holes on the QFD. I told my stepdad about it, and he suggested that I use superglue to seal it up. However, I am weary of doing this, due to what I heard about glue not being too effective. Any suggestions?
Last edited by Major McMan on Sun Jul 12, 2009 2:33 am, edited 1 time in total.
Cthulhu fhtgan..
My armory: XP 150, XP 220, stripped-down XP 70, Max-D 3000, FF ,Monster '01
My armory: XP 150, XP 220, stripped-down XP 70, Max-D 3000, FF ,Monster '01
- Silence
- Posts: 3825
- Joined: Sun Apr 09, 2006 9:01 pm
Re: Monster '01 QFD Leak
Welcome back. ![Smile :)](./images/smilies/icon_e_smile.gif)
Glue doesn't always work, but there really aren't any other options here. For the record, epoxy seems to work well for plugging up small holes, but glue alone doesn't work well when you need to provided structural support. Glue is a good bet here.
I'd follow the steps outlined in this article. You can use a toothpick to poke the glue into the holes (although that depends on the size of the leak, which I don't know). Let it set, give it a shot and tell us how it went.![Smile :)](./images/smilies/icon_e_smile.gif)
![Smile :)](./images/smilies/icon_e_smile.gif)
Glue doesn't always work, but there really aren't any other options here. For the record, epoxy seems to work well for plugging up small holes, but glue alone doesn't work well when you need to provided structural support. Glue is a good bet here.
I'd follow the steps outlined in this article. You can use a toothpick to poke the glue into the holes (although that depends on the size of the leak, which I don't know). Let it set, give it a shot and tell us how it went.
![Smile :)](./images/smilies/icon_e_smile.gif)
- Major McMan
- Posts: 33
- Joined: Wed Jul 16, 2008 8:29 pm
Re: Monster '01 QFD Leak
The size of the leak is very small, three small cracks to be precise. It drained water out of my pressure chamber pretty quickly, though.
I'll seal it up tommorow, and tell you guys how it went. Thanks for your input!
![Smile :)](./images/smilies/icon_e_smile.gif)
I'll seal it up tommorow, and tell you guys how it went. Thanks for your input!
Cthulhu fhtgan..
My armory: XP 150, XP 220, stripped-down XP 70, Max-D 3000, FF ,Monster '01
My armory: XP 150, XP 220, stripped-down XP 70, Max-D 3000, FF ,Monster '01
- Major McMan
- Posts: 33
- Joined: Wed Jul 16, 2008 8:29 pm
Re: Monster '01 QFD Leak
The crack was to small to fit the glue into, so I had to put the glue on top of the crack. I couldn't fit the glue bottle into the QFD, so I was unable to get the glue on the other side of the crack as the guide said.
After the glue set, I put the gun back together and tested it- the gun worked just fine, with absolutely no leaks.
Thanks again for your help, SilentGuy.
After the glue set, I put the gun back together and tested it- the gun worked just fine, with absolutely no leaks.
![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
Thanks again for your help, SilentGuy.
Cthulhu fhtgan..
My armory: XP 150, XP 220, stripped-down XP 70, Max-D 3000, FF ,Monster '01
My armory: XP 150, XP 220, stripped-down XP 70, Max-D 3000, FF ,Monster '01
- Silence
- Posts: 3825
- Joined: Sun Apr 09, 2006 9:01 pm
Re: Monster '01 QFD Leak
Getting the glue into the other side of the crack is difficult, but the reasoning makes sense: on the pressurized side, it acts as a plug, because more pressure could wedge it in deeper rather than pop it out. Of course, it's impossible to do in most cases.
Anyway, I'm glad to hear everything went well. What type of glue did you use? I ask because it sounds like you didn't have to wait to long.![Cool :cool:](./images/smilies/icon_cool.gif)
Anyway, I'm glad to hear everything went well. What type of glue did you use? I ask because it sounds like you didn't have to wait to long.
![Cool :cool:](./images/smilies/icon_cool.gif)
- Major McMan
- Posts: 33
- Joined: Wed Jul 16, 2008 8:29 pm
Re: Monster '01 QFD Leak
I used Loctite Ultra Gel super glue. I didn't keep track of the time it took to try, but I would say it took 45 minutes to an hour.
Cthulhu fhtgan..
My armory: XP 150, XP 220, stripped-down XP 70, Max-D 3000, FF ,Monster '01
My armory: XP 150, XP 220, stripped-down XP 70, Max-D 3000, FF ,Monster '01
-
- Posts: 217
- Joined: Sun Sep 06, 2009 7:48 am
Re: Monster '01 QFD Leak
Hot glue works great for this. I plugged the QFV on my Monster X wiht the stuff.
Personal Collection: Monster X, Monster XL, Helix, Triple Shot, Aquapack Devastator, Liquidator, Arctic Shock, Shot Blast, Splazhzooka
Super Soaker 20, 25, 30, 40, 50, 60, 100, 200, MDS, Bow & Arrow
XP 20, 35, 55, 70, 75, 85, 105, 110, 150, 175, 250, 270, 275, 310
CPS 1000, 1200, 1350(1-3-5), 1500, 2000, 2100, 2500, 2700, 3000, 4100
Super Soaker 20, 25, 30, 40, 50, 60, 100, 200, MDS, Bow & Arrow
XP 20, 35, 55, 70, 75, 85, 105, 110, 150, 175, 250, 270, 275, 310
CPS 1000, 1200, 1350(1-3-5), 1500, 2000, 2100, 2500, 2700, 3000, 4100