CVF 1-3-5
-
- Posts: 66
- Joined: Sun Jun 24, 2007 1:46 am
CVF 1-3-5
Recently I went and did a K-Mod on my CPS 1-3-5, and I can't get even 4 pumps in before the pr valve kicks in. I was wondering where the PRV was located on the CPS 1-3-5. Thanks. Apologies for not supplying a picture, but you can find one fairly easily on iSoaker.
-
- Posts: 66
- Joined: Sun Jun 24, 2007 1:46 am
- C-A_99
- Posts: 1502
- Joined: Tue Aug 01, 2006 11:09 pm
- The Stealthy Panda
- Posts: 88
- Joined: Sun Apr 15, 2007 5:39 pm
- Crashdummy
- Posts: 313
- Joined: Thu Aug 05, 2004 4:43 pm
You can just pull the extra nozzles off and seal the holes, they are held on by glue. Sadly, mine broke because I was too zealous about my modding, but I now know how the trigger valve works.
1: Opens first valve, water rushes out, but is contained by O-rings and shoots only out the main nozzle.
3: Inner part of trigger valve slides back, and side holes line up with the first pair of nozzles.
5: 2nd stronger valve opens, sending water to the outer most nozzles.
It can be modefied to work well by drilling the walls by the side openings, but it would be a lot of work for a still weak gun.
1: Opens first valve, water rushes out, but is contained by O-rings and shoots only out the main nozzle.
3: Inner part of trigger valve slides back, and side holes line up with the first pair of nozzles.
5: 2nd stronger valve opens, sending water to the outer most nozzles.
It can be modefied to work well by drilling the walls by the side openings, but it would be a lot of work for a still weak gun.