Help

Repairs to water guns. Please put repair topics in this forum so that people do not have to sort through so many topics when looking for a repair. If a fix is included in the topic, please add (Fixed) before the topic title to indicate so.
Locked
soakerfool
Posts: 37
Joined: Sun Mar 14, 2004 12:39 pm

Post by soakerfool » Mon Jul 26, 2004 2:18 pm

Well my power pack is leaking right where the tube pivots (I rearly don't know how else to explain it...). I waas thinking about puting epoxy all over it but then it won't pivot tell me if you think you have a better idea. Thanks!

User avatar
Jadefalcon09
Posts: 409
Joined: Sat Sep 06, 2003 12:00 pm

Post by Jadefalcon09 » Mon Jul 26, 2004 4:49 pm

Hm, do you mean where the tubing curves, or where it attaches to the gun? anyways epoxy will do the trick, but be careful not to get any inside the tubing itself. Let it dry for 24 hours, then sand it down. It should be OK then!

User avatar
vaporizer28
Posts: 187
Joined: Thu Jun 17, 2004 1:47 pm

Post by vaporizer28 » Mon Jul 26, 2004 4:49 pm

You could open it up and use electrical tape to wrap around the outside of the tube piece. :blink:

I don't know if it would work but I get what you mean B)

EDIT: jadefalcon09, he means where the tube attaches to the gun. :P
Image

^This was made by Superstormer. What, do you think it got here on its own?

Drewsky92
Posts: 151
Joined: Thu May 27, 2004 12:00 pm

Post by Drewsky92 » Mon Jul 26, 2004 7:28 pm

I recamend plumbers epoxy coated over with water proof epoxy (this is how I CVFed my 21000).

Locked