Experimenting With K Mod
-
- Posts: 5
- Joined: Wed Jun 30, 2004 9:29 pm
well this may be collusing (yes I know I can't spell it) but im going to try to put some bike tubing over the air pressure thingy will it work? im asking for advice if its already been done or just advice on what should I do if I do do it for example what size bike tubing? any suggestions will be welcome
- vaporizer28
- Posts: 187
- Joined: Thu Jun 17, 2004 1:47 pm
- Spinner
- Posts: 1337
- Joined: Tue Feb 10, 2004 12:00 pm
Please use capitalization and punctuation! It makes it much easier to read.
I take it you're planning on taking out the PC of some air-pressure gun and replacing it with inner tubing to make it CPS. First of all, which blaster are you modding? Secondly, this isn't a K mod (as the title suggested) nor collosus either. Both of those mods are done on CPS-class guns. This is an internal replacement.
I'd suggest you put several layers of inner tube on. I think it will be hard though to get this to work...better ask one of the techies. Duxburian?
I take it you're planning on taking out the PC of some air-pressure gun and replacing it with inner tubing to make it CPS. First of all, which blaster are you modding? Secondly, this isn't a K mod (as the title suggested) nor collosus either. Both of those mods are done on CPS-class guns. This is an internal replacement.
I'd suggest you put several layers of inner tube on. I think it will be hard though to get this to work...better ask one of the techies. Duxburian?
-
- Posts: 151
- Joined: Thu May 27, 2004 12:00 pm
- DX
- Posts: 1780
- Joined: Wed Feb 04, 2004 1:00 pm
Well, you only do them because you have all the equipment. I did have to do about 17 or so trigger repairs on a gun because nothing was working, etc. I'll be able to do mods independently when I get some basic tools that I'm lacking.
Mess With the Best, Get Soaked Like the Rest!
2004 Red Sox - World Series Champions
2007 Red Sox - World Series Champions!
2004 Red Sox - World Series Champions
2007 Red Sox - World Series Champions!
-
- Posts: 515
- Joined: Thu Apr 15, 2004 11:45 pm
Dude...I'm also a techie. Like, a lot. Serious. I Don't know about Dux, but I know that I know a XPBackfire-esqueload about tech. Like, a XPBackfire-esqueload. Serious.Originally posted by Spinner@Jul 26 2004, 01:15 AM
Please use capitalization and punctuation! It makes it much easier to read.
I take it you're planning on taking out the PC of some air-pressure gun and replacing it with inner tubing to make it CPS. First of all, which blaster are you modding? Secondly, this isn't a K mod (as the title suggested) nor collosus either. Both of those mods are done on CPS-class guns. This is an internal replacement.
I'd suggest you put several layers of inner tube on. I think it will be hard though to get this to work...better ask one of the techies. Duxburian?
Ok so...I Don't think you caught his drift, spinner. I'm pretty sure he wants to put bike tube over the plastic PC. And I am literally laughing my butt off right now.
- DX
- Posts: 1780
- Joined: Wed Feb 04, 2004 1:00 pm
I Don't know as much about tech as most think-so stop bringing me into everything!
If I have knowledge on something, then I'll post on it, but Ive never done some things like internal replacement [this topic] and so therefore know nothing about it.
If I have knowledge on something, then I'll post on it, but Ive never done some things like internal replacement [this topic] and so therefore know nothing about it.
Mess With the Best, Get Soaked Like the Rest!
2004 Red Sox - World Series Champions
2007 Red Sox - World Series Champions!
2004 Red Sox - World Series Champions
2007 Red Sox - World Series Champions!
- BlueSmudge
- Posts: 886
- Joined: Sun Apr 18, 2004 10:57 pm
First off. If you want to put it on a PR gun, it won't work... Duh. PR doesn't pump water in. So it would only work as a nerf gun or something. Yeah, whatev...? :huh:
If you are doing it to a gun like a XP-310 or Max-D 6000, you could just do aXPS mod.
If you are doing it to a gun like a XP-310 or Max-D 6000, you could just do aXPS mod.
--------------------------------------------------------------
BlueSoak.net
--------------------------------------------------------------
BlueSoak.net
--------------------------------------------------------------
-
- Posts: 5
- Joined: Wed Jun 30, 2004 9:29 pm
Actually, I was planning to strech some bike tubing over the balloon bladder. Then use balloons to hold it on. *bike tubing first balloons second* Sorry I didn't respond in the topic went to a fishing trip in Wisconsin for 4 days. I would also like to know the equilvalent of balloons the bike tubing might compare to the balloons. *sorry I know it sounds weird* Fore example 1 peice of bike tubing = 5 balloons or something. I am reinforcing the internals twice over to, the weapon im modifying is my CPS 2100.
- DX
- Posts: 1780
- Joined: Wed Feb 04, 2004 1:00 pm
-
- Posts: 68
- Joined: Mon Apr 19, 2004 7:10 pm
So you want to do a K-Mod, but with bike tubing.
Good luck, I've tried to get a section of inner tubing over a CPS-balloon, several different diameters of tubing in fact - not possible. I even tried using 3+ pairs of locking pliers, a table vice, and baby-powder to pull the innertubing over.
I won't go into explaining how I used these tools... but you get my drift, its difficult. Use balloons.
On the other hand, I have made multiple PC's out of inner tubing alone. I have a few depending on how much water I want to hold and at what pressure. My best has about 19 layers of inner tubing, puts out about 54 PSI (pressure guage on gun) and holds 1.3L.
--Blake
Good luck, I've tried to get a section of inner tubing over a CPS-balloon, several different diameters of tubing in fact - not possible. I even tried using 3+ pairs of locking pliers, a table vice, and baby-powder to pull the innertubing over.
I won't go into explaining how I used these tools... but you get my drift, its difficult. Use balloons.
On the other hand, I have made multiple PC's out of inner tubing alone. I have a few depending on how much water I want to hold and at what pressure. My best has about 19 layers of inner tubing, puts out about 54 PSI (pressure guage on gun) and holds 1.3L.
--Blake