21k

Threads about water gun modifications.
Drewsky92
Posts: 151
Joined: Thu May 27, 2004 12:00 pm

21k

Post by Drewsky92 » Mon Jul 19, 2004 2:40 am

I just finished K-modding my 2100 (check valve freeze, 60 baloons,valve reinforcement) and the range in HUGE! With three pumps it got 70-75 feet!(25 meters). I highly recamend this mod! The hardest part for me was getting the epoxy off my hands :D . I think it is also Mk1. Post back with your 21K experences!

elusiveviper723
Posts: 22
Joined: Tue Jun 29, 2004 11:25 pm

Post by elusiveviper723 » Mon Jul 19, 2004 2:44 am

hmmm.....70+ feet?...with my k mod which has bout 60 I get 50 something tops...do you think valve renforcement really adds feet?
and thats fully pumped

Drewsky92
Posts: 151
Joined: Thu May 27, 2004 12:00 pm

Post by Drewsky92 » Mon Jul 19, 2004 11:23 am

I sware it got over 70 feet. Now it's more powerful than my garden hose.

User avatar
Spinner
Posts: 1337
Joined: Tue Feb 10, 2004 12:00 pm

Post by Spinner » Mon Jul 19, 2004 12:41 pm

70 feet is a very long way to say the least! Congratulations! What's the distance when held level? Any pictures of it firing? Or while you're about it, videos? ;)
ISS: Soaker Sagas

Submit your saga and see it up with other titans of water warfare.

User avatar
DX
Posts: 1780
Joined: Wed Feb 04, 2004 1:00 pm

Post by DX » Mon Jul 19, 2004 5:13 pm

Did you measure that range? I highly doubt that 70+ ft is possible with a 60 balloon k-mod, even if it is an mk1 21000. My 2 21k's were 68 and 69 balloons with 50-58ft range on 5 pumps, the first had better range, but it was mk1 [might have been mk2, I've forgotten] and the second was mk3. Still, if you insist it was 70 feet, then get some pics up soon!
I also don't think reinforcement would boost range, as you don't even need to reinforce anything on the 2100.
I think it is also Mk1
Most likely if its got that range-does it have a very pronounced ridge running down the back of the reservoir? If it does, then its either mk1 or mk2, I think screw placement and the internals differentiate between mk1 and mk2. It is easy to identify an mk3 2100, the ridge at the back is very slight. If you have an mk3, Don't bother k-modding it-get an mk1 which will give you more power and range.
Mess With the Best, Get Soaked Like the Rest!

2004 Red Sox - World Series Champions
2007 Red Sox - World Series Champions!

ChaosKnight
Posts: 89
Joined: Sun May 09, 2004 12:00 pm

Post by ChaosKnight » Mon Jul 19, 2004 11:05 pm

wow! I too would like to see some videos of that sucker shooting! does it have recoil when you shoot it? that would be the best!
http://xs7.xs.to/pics/04512/sig2.jpg
-whoamg, I can't put ANY anime girl in my sig without doom deleting it. =\

User avatar
wetmonkey442
Posts: 320
Joined: Sun Jun 22, 2003 12:00 pm

Post by wetmonkey442 » Thu Jul 22, 2004 12:05 am

I k-modded my 2100 with only 20 balloons. The cps bladder kept slipping off of the trigger valve, so I kinda gave up. Any suggestions?
Join the fight! Support water warfare in your area today!

User avatar
SSCBen
Posts: 6449
Joined: Sat Mar 22, 2003 1:00 pm

Post by SSCBen » Thu Jul 22, 2004 12:11 am

Originally posted by Drewsky92@Jul 18 2004, 09:40 PM
I just finished K-modding my 2100 (check valve freeze, 60 baloons,valve reinforcement) and the range in HUGE! With three pumps it got 70-75 feet!(25 meters). I highly recamend this mod! The hardest part for me was getting the epoxy off my hands :D . I think it is also Mk1. Post back with your 21K experences!
That is beyond impossible. There is no way it could go that far with only 60 balloons and only 3 pumps. All my homemades are more powerful than a hose and they don't go that far. I'd suggest using a measuring tape, not using glycerin and measuring only when there is no wind and on a dry surface such as a road. I always do, and my homemade which must have a CPS chamber a few mms thicker than any K modded gun only get 63 feet max range at the last drop. I strive for accuracy in my measurements, and that is why I use the last large puddle thing, because that is the effective range. It is impossible for only a 60 balloon K mod to do that, but if you insist. I'd still like to see some good evidence like pictures or a remeasurement.

User avatar
Dark Elite
Posts: 217
Joined: Wed Jul 14, 2004 1:46 pm

Post by Dark Elite » Thu Jul 22, 2004 12:28 pm

I agree with Doom, that just doesn't sound possible. You're saying you can outrange a CPS2000 MK1 with only 3 pumps? not likely. Post a picture and I might believe you.
Visit <span style='font-size:14pt;line-height:100%'><span style='color:red'>Sam's Supercars

<span style='font-size:8pt;line-height:100%'><span style='color :o range'><span style='font-family:Arial'><u>My Weaponry</u>
CPS2100 (Thank You King Soaker&#33 ;)
1 Liquidator/Pressurizer
1 Max-D 6000
1 XP310 w/my own power mod and 8 balloon XPS mod
2 piston-pistols (backup)


Image

Drewsky92
Posts: 151
Joined: Thu May 27, 2004 12:00 pm

Post by Drewsky92 » Sat Jul 24, 2004 2:30 am

wow! I too would like to see some videos of that sucker shooting! does it have recoil when you shoot it? that would be the best!
Let's just say that I pumped it 15 times and gave it to my little brother and he dropped it.

It shoots 66 feet on the dot. A pick will be poasted later.

ssfanatic
Posts: 5
Joined: Wed Jun 30, 2004 9:29 pm

Post by ssfanatic » Sat Jul 24, 2004 2:44 pm

congrats im in the process of modifying my 2100 I already did the chack valve freeze (well I cut off the check valve anyway) im going to reinforce the internals twice over with epoxy and im going to try a experimental technique with k moddding

User avatar
RacerSoaker445
Posts: 951
Joined: Sun Mar 14, 2004 2:27 pm

Post by RacerSoaker445 » Sat Jul 24, 2004 2:51 pm

I did a 60 balloon K modded and valve freezed my 12000, it now gets 55-58 feet with 5-10 pumps.
I don't check this forum anymore.

User avatar
DX
Posts: 1780
Joined: Wed Feb 04, 2004 1:00 pm

Post by DX » Sat Jul 24, 2004 4:24 pm

congrats im in the process of modifying my 2100 I already did the chack valve freeze (well I cut off the check valve anyway) im going to reinforce the internals twice over with epoxy and im going to try a experimental technique with k moddding
You don't have to reinforce the internals on the 2100, so don't waste the epoxy. ;)
A new technique? Please post back if it works!
Mess With the Best, Get Soaked Like the Rest!

2004 Red Sox - World Series Champions
2007 Red Sox - World Series Champions!

Drewsky92
Posts: 151
Joined: Thu May 27, 2004 12:00 pm

Post by Drewsky92 » Sat Jul 24, 2004 6:06 pm

When shot, the 21k was such a high velocity that by the time the stream is at 50 feet, the entire stream is turned into a thousand balls of water. The velocity is HIGHER than a 2000 Mk1 so it FEELS a mini CPS 2000!

hooligan
Posts: 75
Joined: Mon May 31, 2004 12:00 pm

Post by hooligan » Sat Jul 24, 2004 9:16 pm

I don't know what MK I have.

I tried twisting the cap, no luck .MY nozzle seems to be stuck withte casing, while the back of the resoivior has a 3-4 mm ridge sticking out from the back. It's very clear. Is this possibly an MK4?
<span style='color:red'>Because Hooligans are
1)Useless
2)Pointless
3)Redundant
4)Useless
5)Pointless
6)Redundant

Locked