Hi.
I would just like to know that the CPS 1000, people say the pump is weak. is this rumours, or is that true also people say that the pump pulls out when pumping, are these true about the CPS 1000.
I would try it on my CPS but I Don't want to take it out of the box.
CPS 1000
- Soaker Leader
- Posts: 228
- Joined: Wed Sep 01, 2004 1:43 pm
- RacerSoaker445
- Posts: 951
- Joined: Sun Mar 14, 2004 2:27 pm
- Soakologist
- Posts: 575
- Joined: Fri Apr 04, 2003 1:00 pm
If the pump is indeed coming out, then you have a pump shaft cap missing. You can fix this problem by following one of the solutions in the Tech section. In my experience though, the CPS 1000, 15/1700, and 2700 have the weakest pumps. The 1200 and the XP/Max-Ds all have pretty strong pumps.
Whatever music you listen to probably sucks.
- jiany98
- Posts: 18
- Joined: Tue Jul 06, 2004 12:30 pm
During a duel my friend's pump rod came out. Since then he has secured it with duct tape. I have asked for permission to fix it but he does not wish to let me in the fear that I will make it worst...
The creator of the universe works in mysterious ways. But he uses a base ten counting system and likes round numbers.
- SSCBen
- Posts: 6449
- Joined: Sat Mar 22, 2003 1:00 pm
The end parts of my CPS 1000's pump have broken off, and eventually I'll get a repair on SSCentral. I am fixing it with epoxy, sandpaper, a dowel rod, some 1/2" schedule 80 PVC and 1/2" OD brass tubing. All of that stuff goes together to put the pieces back together, and then reinforce it. The 1/2" OD brass tubing is perfect for external reinforcement, I am only using a short piece however to bridge the broken spot. If you wanted to I'm sure you could put it over your entier pump, and it would shine like a mirror (as well as probably never break ever).