help with gun
- Sanityjr
- Posts: 5
- Joined: Sun Jan 08, 2006 8:52 pm
help with gun
Ok a little while back i made my first homemade nerf gun. It is made out of 1" pvc and can shoot a dart up to 250 feet if I turn my 3/4" metal ball valve fast enough. Well then on the nerf website they talked about a douchenator so I looked it op on google and it led me here. Well after seeing the skematics for the douchenator I attemped to make a 3" pvc attachment. Well I put all the pieces together but didn't (and I'm too lazy to add the apostrophe, and I, the admin like changing other peoples post!) glue it together today, so I took it for a test run. Either I need to make a whole new gun that uses a 1 and 1/4" valve or something because it barely made it out of the barrel. Could someone please tell me where I went wrong. Help would be apreciated.
Edit: ha ha ha...... nice try, trying to edit my post, eh?
well This little piggy won't (and I'm too lazy to add the apostrophe!) be overpowered without a stern talking to
Double Edit: oh yeah nice word filter you have going there, kind of like if you were to write sniper, it shows up as LOSER on nerfhaven
Edit: ha ha ha...... nice try, trying to edit my post, eh?
well This little piggy won't (and I'm too lazy to add the apostrophe!) be overpowered without a stern talking to
Double Edit: oh yeah nice word filter you have going there, kind of like if you were to write sniper, it shows up as LOSER on nerfhaven
Last edited by Sanityjr on Thu Jan 12, 2006 1:32 am, edited 1 time in total.
- DX
- Posts: 1780
- Joined: Wed Feb 04, 2004 1:00 pm
In order to make a full hybrid nerf/water balloon launcher, the pc [air chamber in nerf terminology] has to be at least 2" PVC, best if 2.5" or 3". Your ball valve size also won't let the air get out quick enough, so I would recommend a valve of at least 1". With a large enough pc and valve, it will be able to support a 1/2" nerf barrel and larger barrels for water balloons and other objects. My friend and I had an idea of shooting a foam pool noodle out of ours, making that a giant dart!
Mess With the Best, Get Soaked Like the Rest!
2004 Red Sox - World Series Champions
2007 Red Sox - World Series Champions!
2004 Red Sox - World Series Champions
2007 Red Sox - World Series Champions!
- SSCBen
- Posts: 6449
- Joined: Sat Mar 22, 2003 1:00 pm
If you are looking for a good water balloon launcher and homemade Nerf dart gun design, look no further than my brother's homemade Nerf gun. Design something similar and you can make a very good water balloon launcher. I myself am considering working with him on a slightly more reliable system that uses big rubber disks like the Super Soaker valves as opposed to smaller O-rings. The rubber disks will make a much easier seal and also take less work to construct, however, they will cost many times more money (maybe $5 each). The rubber disks I am considering at the moment are Buna-N U-Cups on McMaster.com.
Triggered homemade Nerf guns are completely possible and people should catch up by now.
Triggered homemade Nerf guns are completely possible and people should catch up by now.
Last edited by SSCBen on Thu Jan 12, 2006 12:30 am, edited 1 time in total.
- Sanityjr
- Posts: 5
- Joined: Sun Jan 08, 2006 8:52 pm
well I guess by the looks of it, I need to make a bigger air supply, but there was a major problem. I tried to make it so that The tubing would go from 3" to 1 and 1/4" but either I couldn't find a part or something, because I couldn't reduce it down so I re-used my other gun because i could reduce it to 3/4 inch
- DX
- Posts: 1780
- Joined: Wed Feb 04, 2004 1:00 pm
- Sanityjr
- Posts: 5
- Joined: Sun Jan 08, 2006 8:52 pm
- NiborDude
- Posts: 683
- Joined: Sun May 23, 2004 12:00 pm
20 inches sounds like a good sized PC. The larger the volume, the better. The barrel on the original Douchenator was about 2' 6" but we have learned from our mistakes. The new Douchenator's barrel is about 3' 6" long. Length depends on your PC size, I heard some where that a good ratio for barrel to PC is 2 to 1. In any case, the longer the barrel, the more accurate you're going to be.
<span style='color:EEF2F7'>Blinding ignorance does mislead us. O! Wretched mortals, open your eyes! -Leonardo Da Vinci
- Sanityjr
- Posts: 5
- Joined: Sun Jan 08, 2006 8:52 pm
Well It works now, with a 3 foot barrel. I can only guess that it can go about 100 yards maximum. I shot it from my backyard so I couldnt measure it becasue it went of two or three fences, so I will try to post the distance soon.
Last edited by Sanityjr on Wed Jan 18, 2006 1:06 am, edited 1 time in total.