Vaporizer mod
- SSCBen
- Posts: 6449
- Joined: Sat Mar 22, 2003 1:00 pm
Vaporizer mod
All I did today because I got locked out again was work on my Vaporizer. I realized that it was a pump-action gun, but that didn't stop me from turning it into a CPS, and this mod is completely reversable too! It's the next CPS 1000, very easy to make, the hardest part was building my own check valve since my other ones were being used. :Hey, that's funny.: This thing is pretty weird looking now, I'm thinking about calling my gun "Mutant" or "The Mutant" or maybe even something odd like Martha.
I will try to get pictures and a mod article up soon. I think I have about 3 new articles written as of now, all mods, and I've started writing Leftovers, now this is going to be written.
Basically this mod makes new internals for the Vaporizer. It adds all the parts it was missing to make it a CPS gun. It's even superchargeable if you have the right stuff. It has about a 5X-7X nozzle(5mm), and because it uses the nozzle system I made for my homemades you can have nozzles until you are tired of drilling. Right now I have a 1mm and a 5mm nozzle, outputs are unknown. The range was not accurately tested, but it was pretty far on the 5mm setting, at least 40 feet. Very good mod, wait for the pics and the article. Well worth the $5 Vaporizer and the cheap parts needed!
I will try to get pictures and a mod article up soon. I think I have about 3 new articles written as of now, all mods, and I've started writing Leftovers, now this is going to be written.
Basically this mod makes new internals for the Vaporizer. It adds all the parts it was missing to make it a CPS gun. It's even superchargeable if you have the right stuff. It has about a 5X-7X nozzle(5mm), and because it uses the nozzle system I made for my homemades you can have nozzles until you are tired of drilling. Right now I have a 1mm and a 5mm nozzle, outputs are unknown. The range was not accurately tested, but it was pretty far on the 5mm setting, at least 40 feet. Very good mod, wait for the pics and the article. Well worth the $5 Vaporizer and the cheap parts needed!
- wetmonkey442
- Posts: 320
- Joined: Sun Jun 22, 2003 12:00 pm
- SSCBen
- Posts: 6449
- Joined: Sat Mar 22, 2003 1:00 pm
I just was messing around with it on the 1mm nozzle. When the ball valve I used as a trigger is open it still has that pump action on that nozzle! This is a great mod, you should buy the Vaporizer anyway, it's a good gun. I hope this creates a good buzz with the community, the 04s are great when modded! Well, at least the Vaporizer is, I don't know about the other ones.
I also did some other mods to my Vaporizer other than what I said. First, since the pump cap wasn't attached to the reservour, due to the XPBackfire-esquepy quick fill caps, I attached it, and I'm going to have an article on how to do that. I also added a strap, the Vaporizer has good spots for it.
I think my Vaporizer is my new weapon for 2004, low pumps, great shot time, lightweight, good range, pump action, variety of nozzles, the list goes on. Maybe it will need a backpack or some reservour expansions later, but right now it's amazing, great gun when modded! I think you can tell how please I am with this weapon, it's great!
I also did some other mods to my Vaporizer other than what I said. First, since the pump cap wasn't attached to the reservour, due to the XPBackfire-esquepy quick fill caps, I attached it, and I'm going to have an article on how to do that. I also added a strap, the Vaporizer has good spots for it.
I think my Vaporizer is my new weapon for 2004, low pumps, great shot time, lightweight, good range, pump action, variety of nozzles, the list goes on. Maybe it will need a backpack or some reservour expansions later, but right now it's amazing, great gun when modded! I think you can tell how please I am with this weapon, it's great!
- Neuro
- Posts: 1081
- Joined: Thu May 01, 2003 12:00 pm
- SSCBen
- Posts: 6449
- Joined: Sat Mar 22, 2003 1:00 pm
Ok, I've been messing with it more, I got 2 pics, I'll attach them.
I'm trying to get this thing to work when collosused, most of the time stuff will burst off when it does, I need to get the bike tubes on as evenly as possible for it to work.
I've attached one picture, I'll take the other one likely tommorow, the one of it shooting doesn't show it's true power.
I'm trying to get this thing to work when collosused, most of the time stuff will burst off when it does, I need to get the bike tubes on as evenly as possible for it to work.
I've attached one picture, I'll take the other one likely tommorow, the one of it shooting doesn't show it's true power.
- Attachments
-
- DSCN0441.JPG (416.65 KiB) Viewed 1353 times
- Spinner
- Posts: 1337
- Joined: Tue Feb 10, 2004 12:00 pm
- Spinner
- Posts: 1337
- Joined: Tue Feb 10, 2004 12:00 pm
- Neuro
- Posts: 1081
- Joined: Thu May 01, 2003 12:00 pm
I know a bit about case modding, but not for soakers.... (sorry, off topic)
but that could be interesting - what if you took a computer case and put parts from a bunch of different soakers in it, you could stick the nozzles out the drive bays and have the triggers where the motherboard inserts would be. perfect for base defense.
but that could be interesting - what if you took a computer case and put parts from a bunch of different soakers in it, you could stick the nozzles out the drive bays and have the triggers where the motherboard inserts would be. perfect for base defense.
-
- Posts: 75
- Joined: Mon May 31, 2004 12:00 pm
Okay so...you said variety of nozzles? Where? On your mod? Can't see the picture. Secondly, how do you add a strap? Duct tape? Man, Itried duct tape on my cps, but it will go to waste if I take it off, as I already did, but it's still a bit sticky. I guess I will HAVE to reinforce the duct tape with more duct tape. How did you make a strap for yours?
<span style='color:red'>Because Hooligans are
1)Useless
2)Pointless
3)Redundant
4)Useless
5)Pointless
6)Redundant
1)Useless
2)Pointless
3)Redundant
4)Useless
5)Pointless
6)Redundant