Max-d 3000 trigger valve issue
- The Stealthy Panda
- Posts: 88
- Joined: Sun Apr 15, 2007 5:39 pm
Max-d 3000 trigger valve issue
I just got an Md 3000 from a friend, and it's been subject to severe neglect. The reservoir is moldy, the dry-firing discharge smells like, well, mold, and worst of all, the trigger valve is really screwed up. I've put two rubber bands on, and it still doesn't work, it remains open just a sliver. I'm seriously considering replacing the entier trigger setup with a ball valve. What's wrong? How do I fix it?
- Silence
- Posts: 3825
- Joined: Sun Apr 09, 2006 9:01 pm
Well, you need more rubber bands. I did an identical repair to a Max-D 3000, except I added maybe 5-8 orthodontical rubber bands (I don't know what strength they were; they come in various sizes). Fewer would have worked, but I just wanted to be sure.
Press on the valve levers after adding each rubber band to see if it will close anymore, even with the extra rubber band. If that's the case, add another rubber band and try again until the rubber bands close the valve all the way.
I'm kinda disappointed with the Max-D 3000's trigger system. Sure, the gun performs well, but now I've got to go back and see where it's leaking every time you fire. Plus the rubber bands might eventually give way again. It's a safe bet to repair the gun but use something else instead.
Press on the valve levers after adding each rubber band to see if it will close anymore, even with the extra rubber band. If that's the case, add another rubber band and try again until the rubber bands close the valve all the way.
I'm kinda disappointed with the Max-D 3000's trigger system. Sure, the gun performs well, but now I've got to go back and see where it's leaking every time you fire. Plus the rubber bands might eventually give way again. It's a safe bet to repair the gun but use something else instead.
- The Stealthy Panda
- Posts: 88
- Joined: Sun Apr 15, 2007 5:39 pm
- The Stealthy Panda
- Posts: 88
- Joined: Sun Apr 15, 2007 5:39 pm
- C-A_99
- Posts: 1502
- Joined: Tue Aug 01, 2006 11:09 pm