Additives
- SSCBen
- Posts: 6449
- Joined: Sat Mar 22, 2003 1:00 pm
Additives
After remembering something from WWN I finally picked some up, Glycerin (Glycerine in the UK). This stuff is expensive, more than $3 for a bottle. For those of you thinking "What the Hasbro HQ does this do," it is supposed to increase your range 5 to 10 feet at his amount, claimed by Big Bee. You are supposed to mix it 19 parts water and 1 part glycerin (5% Glycerin). One bottle, which actually is for skin care and making beer, should be good for about 2.36 liters of water. I am unsure about how this will affect a CPS sytem, I will test it on some of my CPS tubing and see if it reacts.
This stuff will make your water toxic! Do not drink it, and contact poison control ASAP if anything happens.
This really is mostly a test that I am recording online. I am still yet to test it, but if it works them I might use it. Currently I think it is too expensive and should only be used for snipers who need all the range they can get. With a good APH I think you could get easily more than 60 feet range, likely close to 70. With a gun designed purely for sniping I think that more than 70 feet could be easily achieved.
I also will be finding other "additives" and testing them. I also will test if using more than 5% will increase range. Wetting agents is what I think they are called, I hope I can find something cheaper and that comes in larger amounts.
-
- Posts: 89
- Joined: Sun May 09, 2004 12:00 pm
is this glycerine like the explosive nitro glycerine by any chance . that would be soooo funny if it was. it would be like that one scene in zoolander where the male models spray themselves with gasoline at a gas stop and they frolic and play. then one of them lights a cigarette. ben stiller goes "nooooooooo" then, BOOM!
http://xs7.xs.to/pics/04512/sig2.jpg
-whoamg, I can't put ANY anime girl in my sig without doom deleting it. =\
-whoamg, I can't put ANY anime girl in my sig without doom deleting it. =\
- SSCBen
- Posts: 6449
- Joined: Sat Mar 22, 2003 1:00 pm
Now I have tested and I must say, this stuff is sniper juice!
I used 30 ml of this stuff, and a bit less than 600 ml of water, trying to get close to 570 ml but I'm not perfect. I mixed it afterwards, and kept mixing it just in case it settled. I then used 600 ml of water to compare it too. Using my single chamber APH with a 3/16" nozzle at 14 pumps on both of them, I shot the normal water and the glycerin water.
The improvement between normal water and glycerin water was incredible. The glycerin water shot 10 feet 7 inches more to the last large spot, and 9 feet 3 inches more to the last drop.
Normal range was 38 feet flat to the last large spot and 42 feet 3 inches to the last drop. Glycerine water range was 48 feet 7 inches to the last large spot and 51 feet 6 inches to the last drop. There was no change in shot time, so the output was the same.
Two pictures below, I suggest some of you try this if you say you are a sniper. However, wait for me to make sure it's CPS safe if you are using a CPS gun.
http://www.sscentral.net/images/glycerin/DSCN0230.JPG
http://www.sscentral.net/images/glycerin/DSCN0235.JPG
I used 30 ml of this stuff, and a bit less than 600 ml of water, trying to get close to 570 ml but I'm not perfect. I mixed it afterwards, and kept mixing it just in case it settled. I then used 600 ml of water to compare it too. Using my single chamber APH with a 3/16" nozzle at 14 pumps on both of them, I shot the normal water and the glycerin water.
The improvement between normal water and glycerin water was incredible. The glycerin water shot 10 feet 7 inches more to the last large spot, and 9 feet 3 inches more to the last drop.
Normal range was 38 feet flat to the last large spot and 42 feet 3 inches to the last drop. Glycerine water range was 48 feet 7 inches to the last large spot and 51 feet 6 inches to the last drop. There was no change in shot time, so the output was the same.
Two pictures below, I suggest some of you try this if you say you are a sniper. However, wait for me to make sure it's CPS safe if you are using a CPS gun.
http://www.sscentral.net/images/glycerin/DSCN0230.JPG
http://www.sscentral.net/images/glycerin/DSCN0235.JPG
-
- Posts: 32
- Joined: Fri Jul 02, 2004 10:54 pm
The glycerin does sound cool, but I'd probably worry if I used it. I mean, what if you shot is at someone out of, say, a CPS 2000? The range must be incredible! It would definitely be cool, but I agree with Storm, using glycerin could be dangerous. If someone accidentally ingested it during a water fight, then the fight would stop being cool and start to not be fun. By the way, what does exactly does glycerin have to do with increasing the range of a water gun? :huh:
- BlueSmudge
- Posts: 886
- Joined: Sun Apr 18, 2004 10:57 pm
I don't know, but you can use it to clean your teeth or gums, or something. As long as you Don't swallow it. I think it must somehow increase stream cohesion. Thats the only way to increase range without increasing outpoot.
--------------------------------------------------------------
BlueSoak.net
--------------------------------------------------------------
BlueSoak.net
--------------------------------------------------------------
-
- Posts: 515
- Joined: Thu Apr 15, 2004 11:45 pm
- SSCBen
- Posts: 6449
- Joined: Sat Mar 22, 2003 1:00 pm
Yeah, same here. That was the range on a 3/16" nozzle with 14 pumps. Imagine if I did this on my dual chamber on a 3/8" nozzle with 55-65 pumps... 60 foot range easy, probably closer to 70.
I am not sure about other things. I am still researching this and I'm going to at least try to find something safer and better. My biggest problem with this stuff is that it's expensive, $3 a bottle, and a bottle is only 118 ml. I am hoping to be able to buy this stuff in bulk.
I could explain how this stuff works, but it would be too complicated for most. Just accept that it does work. ^_^
I am wondering if I add more than 5% if it will increase range even more. If 5% increases range 8 feet, then 10% would increase it by 16 feet? It probably isn't like that but I bet more would increase range even more. I wonder how far it would shoot a PC full of pure glycerin...
I am not sure about other things. I am still researching this and I'm going to at least try to find something safer and better. My biggest problem with this stuff is that it's expensive, $3 a bottle, and a bottle is only 118 ml. I am hoping to be able to buy this stuff in bulk.
I could explain how this stuff works, but it would be too complicated for most. Just accept that it does work. ^_^
I am wondering if I add more than 5% if it will increase range even more. If 5% increases range 8 feet, then 10% would increase it by 16 feet? It probably isn't like that but I bet more would increase range even more. I wonder how far it would shoot a PC full of pure glycerin...
-
- Posts: 1
- Joined: Fri Jun 18, 2004 7:10 am
try
http://www.amazon.com/exec/obidos/tg/de ... lectronics
they sell another wetting agent... shd work like glycerine
http://www.amazon.com/exec/obidos/tg/de ... lectronics
they sell another wetting agent... shd work like glycerine
- Dark Elite
- Posts: 217
- Joined: Wed Jul 14, 2004 1:46 pm
[at]doom : yeah then you fire 80% glycerine and it goes 128feet further...
It might be just that it increases stream lamination (I.e. the water stays together for longer)
Do you think it'd work with an XPSed blaster (I.e. my 310 with fanspray) because that'd just be awesome!
Oh yeah Doom, if you fired a chamber of pure glycerine it would just stick up around the chamber walls and wreck your blaster (at least more likely than not), so I wouldn't try that...
It might be just that it increases stream lamination (I.e. the water stays together for longer)
Do you think it'd work with an XPSed blaster (I.e. my 310 with fanspray) because that'd just be awesome!
Oh yeah Doom, if you fired a chamber of pure glycerine it would just stick up around the chamber walls and wreck your blaster (at least more likely than not), so I wouldn't try that...
Visit <span style='font-size:14pt;line-height:100%'><span style='color:red'>Sam's Supercars
<span style='font-size:8pt;line-height:100%'><span style='color range'><span style='font-family:Arial'><u>My Weaponry</u>
CPS2100 (Thank You King Soaker!
1 Liquidator/Pressurizer
1 Max-D 6000
1 XP310 w/my own power mod and 8 balloon XPS mod
2 piston-pistols (backup)
<span style='font-size:8pt;line-height:100%'><span style='color range'><span style='font-family:Arial'><u>My Weaponry</u>
CPS2100 (Thank You King Soaker!
1 Liquidator/Pressurizer
1 Max-D 6000
1 XP310 w/my own power mod and 8 balloon XPS mod
2 piston-pistols (backup)
- SSCBen
- Posts: 6449
- Joined: Sat Mar 22, 2003 1:00 pm
The stuff isn't sticky. I don't think it will gum up anything. It doesn't increase stream lamination directly, rather it increases the viscosity of the liquid which basically means it sticks better together. Stream lamination is not when the stream stays together, it actually means linear flow, but let's not get technical.
http://www.sscentral.net/tech/streams.php
This article I posted a while ago but haven't release officially. Believe me, I know more about soaker tech than 99% of everyone.
http://www.sscentral.net/tech/streams.php
This article I posted a while ago but haven't release officially. Believe me, I know more about soaker tech than 99% of everyone.
- Dark Elite
- Posts: 217
- Joined: Wed Jul 14, 2004 1:46 pm
Then a chamber of glycerine might work...
I took my XP310 apart AGAIN today, removed the res, it was useless anyhow, and noticed that there is nothing forcing water to go into the chambers, the pipe going from the res to the chambers is merely cut open at the point where the chambers tap into it, the chambers don't actually block the pipe in any way.
The water only goes into the chambers because since the nozzle is closed by the trigger mechanism, it has nowhere else to go. So the glycerine would, if it isn't sticky, run from the res, along to the nozzle and the be pushed back into the chambers. What I'm getting at here (Yes, there is a point to this! is that if the pure glycerine moves from the res at all, it should fire OK.
In my XP310 at least, yes a chamber of glycerine would fire.
How much further d'you think a full chamber of glycerine would fire? Thinking about it , err... if 5% goes 8 feet further, then 100% , pure, glycerine would go 160 feet further technically... Although the chances of that happening practically are pretty small. Probably the best range would be acheived by going 50-50, one part glycerine and one part water. Try out different combos.
I took my XP310 apart AGAIN today, removed the res, it was useless anyhow, and noticed that there is nothing forcing water to go into the chambers, the pipe going from the res to the chambers is merely cut open at the point where the chambers tap into it, the chambers don't actually block the pipe in any way.
The water only goes into the chambers because since the nozzle is closed by the trigger mechanism, it has nowhere else to go. So the glycerine would, if it isn't sticky, run from the res, along to the nozzle and the be pushed back into the chambers. What I'm getting at here (Yes, there is a point to this! is that if the pure glycerine moves from the res at all, it should fire OK.
In my XP310 at least, yes a chamber of glycerine would fire.
How much further d'you think a full chamber of glycerine would fire? Thinking about it , err... if 5% goes 8 feet further, then 100% , pure, glycerine would go 160 feet further technically... Although the chances of that happening practically are pretty small. Probably the best range would be acheived by going 50-50, one part glycerine and one part water. Try out different combos.
Visit <span style='font-size:14pt;line-height:100%'><span style='color:red'>Sam's Supercars
<span style='font-size:8pt;line-height:100%'><span style='color range'><span style='font-family:Arial'><u>My Weaponry</u>
CPS2100 (Thank You King Soaker!
1 Liquidator/Pressurizer
1 Max-D 6000
1 XP310 w/my own power mod and 8 balloon XPS mod
2 piston-pistols (backup)
<span style='font-size:8pt;line-height:100%'><span style='color range'><span style='font-family:Arial'><u>My Weaponry</u>
CPS2100 (Thank You King Soaker!
1 Liquidator/Pressurizer
1 Max-D 6000
1 XP310 w/my own power mod and 8 balloon XPS mod
2 piston-pistols (backup)
- Spinner
- Posts: 1337
- Joined: Tue Feb 10, 2004 12:00 pm