Broken 1200
-
- Posts: 8
- Joined: Sun May 06, 2007 11:05 pm
Broken 1200
Hi...I'm relatively new here
I joined because I thought you people were a good lot, but mainly because my trusty CPS 1200 (purple and silver) water gun has broken. I have no idea why - I used it every year during the summer and stored it in the garage during winter, and was fine, but sometime last year it began to fire withour me pulling the trigger - now it just fires every time I pump it. Does anyone know how I can fix this?
I joined because I thought you people were a good lot, but mainly because my trusty CPS 1200 (purple and silver) water gun has broken. I have no idea why - I used it every year during the summer and stored it in the garage during winter, and was fine, but sometime last year it began to fire withour me pulling the trigger - now it just fires every time I pump it. Does anyone know how I can fix this?
Last edited by Windoffire on Thu May 10, 2007 8:49 pm, edited 1 time in total.
- C-A_99
- Posts: 1502
- Joined: Tue Aug 01, 2006 11:09 pm
- Silence
- Posts: 3825
- Joined: Sun Apr 09, 2006 9:01 pm
Welcome to Super Soaker Central!
Yep, check out the open trigger valve repair article. Check in the Tech>Repairs section of the main site.
You'll have to open up the water gun in order to access the parts. Either a spring or a rubber band will do; a rubber band might be easier, though, as those often don't require mounts.
Good luck!
Yep, check out the open trigger valve repair article. Check in the Tech>Repairs section of the main site.
You'll have to open up the water gun in order to access the parts. Either a spring or a rubber band will do; a rubber band might be easier, though, as those often don't require mounts.
Good luck!
-
- Posts: 8
- Joined: Sun May 06, 2007 11:05 pm
- Silence
- Posts: 3825
- Joined: Sun Apr 09, 2006 9:01 pm
I'd try to get the trigger working first. Also, recent trends have involved only a few balloons and no PRVD (check my sig for acronym info), because more power isn't too necessary, it cuts down on PC volume, the chamber won't explode if the PRV is in place, there's less effort if you skip the PRVD, and guns are too expensive these days to replace them.
-
- Posts: 8
- Joined: Sun May 06, 2007 11:05 pm
Ok...I tried all day, laboring to get out the rusted screws and the very annoying 1200 nozzle. I managed to get it open with my dad, but the 1200 has no real palce to stretch a rubber band and keep it there - has anyone repaired a 1200 before? If so, can you write how you did it? I'm trying to Gorilla glue the round plastic washer to the metal pin, since it's apparent that the metal pin isn't going back in all the way for some reason. If I manage to get those pieces together then I can rubber band it, but ti's pretty squished in a 1200 and I think that maybe I'll have to glue a cut rubber band and somehow stretch it over the metal pin.
Gah, I'm not a very good engineer/mechanic
Oh, by the way, does anyone know if the new SS, the blitz something, is any good?
Gah, I'm not a very good engineer/mechanic
Oh, by the way, does anyone know if the new SS, the blitz something, is any good?
- JLspacemarine
- Posts: 120
- Joined: Sat Jul 01, 2006 3:06 am
Well, looks like I'm well placed to help you, I have the same gun and got the same problems. When I got my CPS 1200 (gray/purple), every metal part, including screws, was damaged because of rust. It took me days just to open it, but was repaired after a few hours. The whole trigger mechanism was jammed, so I managed to place a rubber band in a tricky way and it worked. I'll have to open again it to verify how exactly. I'll post pics later this week.
Armory: AS Hydroblitz (x2), MI FlashFlood, STE TripleShot, XP Backfire, XP 215, XP 105, XXP 175, Big Bottle BLaster(x2), SC Power Pak, SpeedLoader1000, SpeedLoader 1500, SpeedLoader Double-Cross 3000, CPS Splashzooka (x2), CPS 1200, CPS 1500,CPS 2100, CPS 2000 Mk2, CPS 1-3-5
-
- Posts: 8
- Joined: Sun May 06, 2007 11:05 pm
-
- Posts: 8
- Joined: Sun May 06, 2007 11:05 pm
- Silence
- Posts: 3825
- Joined: Sun Apr 09, 2006 9:01 pm
-
- Posts: 8
- Joined: Sun May 06, 2007 11:05 pm
- Silence
- Posts: 3825
- Joined: Sun Apr 09, 2006 9:01 pm
If the rust is really bad, then it's possible that you've tried unscrewing so hard that the screw head has been damaged. I've done that countless times. In that case, you could try those special screwdriver heads designed for damaged screws, or you could use a regular drill and drill bit to drill through the screw (very easy if you have a powerful drill).
- RacerSoaker445
- Posts: 951
- Joined: Sun Mar 14, 2004 2:27 pm
-
- Posts: 8
- Joined: Sun May 06, 2007 11:05 pm
- DX
- Posts: 1780
- Joined: Wed Feb 04, 2004 1:00 pm
Drilling is usually a last resort, and usually destroys the screw hole. You can buy a phillips head drill bit and use it to reverse drill screws out, which saves the hole, but doesn't always work. Definitely replace the screws if they are too rusty. Good to see that the repair worked!
Mess With the Best, Get Soaked Like the Rest!
2004 Red Sox - World Series Champions
2007 Red Sox - World Series Champions!
2004 Red Sox - World Series Champions
2007 Red Sox - World Series Champions!