2100 Disassembly
-
- Posts: 22
- Joined: Tue Jun 29, 2004 11:25 pm
-
- Posts: 85
- Joined: Wed Jun 16, 2004 11:40 pm
-
- Posts: 85
- Joined: Wed Jun 16, 2004 11:40 pm
I forgot to mention that there are at least 3 variants of the CPS 2100. Some of them have glued the black cap on the pump track. On these, you will nearly destroy this part of the gut getting it off. If it is just pressed on, you can stick a small flat screw driver under the cap and it will pry off. Getting it back on is an equally good trick.
<span style='font-size:14pt;line-height:100%'>The "S" stands for SUPER Soaker!
- Neuro
- Posts: 1081
- Joined: Thu May 01, 2003 12:00 pm
-
- Posts: 23
- Joined: Tue Jun 22, 2004 5:31 am
- DX
- Posts: 1780
- Joined: Wed Feb 04, 2004 1:00 pm
Its called a pump cap and no, it has nay function on the 2100 except to make it harder to open. If its glued on, then you have to saw it off. I have 2 21000's, one cap was easily pried off, the other one had to be sawed.
Mess With the Best, Get Soaked Like the Rest!
2004 Red Sox - World Series Champions
2007 Red Sox - World Series Champions!
2004 Red Sox - World Series Champions
2007 Red Sox - World Series Champions!
- NiborDude
- Posts: 683
- Joined: Sun May 23, 2004 12:00 pm
The stupid pump cap's purpose is to keep the front part of the pump track together. There are 3 different types of 2100's that I have personally seen and personally worked with. Depending on which one you have will determine how its going to be taken apart. Once you get the pump cap off, your set, take a flat screwdriver and push it into the slit that splits the gun in half, after you get it in, you can force it open easily. What sucks even more is putting it back together.
Edit: I spelled putting ptting
Edit: I spelled putting ptting
<span style='color:EEF2F7'>Blinding ignorance does mislead us. O! Wretched mortals, open your eyes! -Leonardo Da Vinci
-
- Posts: 151
- Joined: Thu May 27, 2004 12:00 pm
-
- Posts: 22
- Joined: Tue Jun 29, 2004 11:25 pm