Has anyone tried making a valve that works by pinching LRT? if there were a way to build a mechanism with strong enough pinching force and electric release, it would provide unparalleled linear flow.
PS: Yes I know it sounds difficult/ impossible.
LRT valve?
-
- Posts: 325
- Joined: Sun Apr 27, 2008 3:13 am
Re: LRT valve?
I do believe this is already used in some commercial water guns, being called a "pinch valve" (I think). A possible way to do this would be to use some heavy-duty spring clamps, but it would take some amount of force to hold them open to fire and be able to close them reliably.Hunt_and_Annoy wrote:Has anyone tried making a valve that works by pinching LRT? if there were a way to build a mechanism with strong enough pinching force and electric release, it would provide unparalleled linear flow.
PS: Yes I know it sounds difficult/ impossible.
Also, LRT might not be the best thing to use. If I were to do this, I would use vinyl tubing or something thinner.
Last edited by aEx155 on Wed May 14, 2008 5:03 am, edited 1 time in total.
- SSCBen
- Posts: 6449
- Joined: Sat Mar 22, 2003 1:00 pm
Re: LRT valve?
Pinch valves have been used before, but they stopped using them because they didn't work well. The original CPS type water guns from back at MIT in the 50s and 60s used LRT with no nozzle or valve, just a piece of tubing pinched.
Anyway, I don't know why you'd want to use LRT because that would limit your pressure to the pressure of the LRT. It also would be harder to pinch because it expands. Vinyl tubing would be best, but even that wouldn't be ideal.
Anyway, I don't know why you'd want to use LRT because that would limit your pressure to the pressure of the LRT. It also would be harder to pinch because it expands. Vinyl tubing would be best, but even that wouldn't be ideal.
- Drenchenator
- Posts: 807
- Joined: Fri Jun 18, 2004 12:00 pm
Re: LRT valve?
Using latex rubber tubing for a pinch valve is a bad idea. Vinyl tubing would be ideal; it's readily available and much cheaper than LRT. I don't see any real benefit using LRT unless you want to increase the cost of the gun.
The SS 50 uses a pinch valve as these internals attest. Pinch valves are good for smaller guns where high flow doesn't matter. The big problem with them is that they tend to leak.
The SS 50 uses a pinch valve as these internals attest. Pinch valves are good for smaller guns where high flow doesn't matter. The big problem with them is that they tend to leak.
The Drenchenator, also known as Lt. Col. Drench.