CPS 1200Mk2.

General water gun discussion.
Locked
User avatar
The Soaker
Posts: 23
Joined: Thu Jun 16, 2011 2:04 am

CPS 1200Mk2.

Post by The Soaker » Thu Jun 16, 2011 2:20 am

hey im new here and I have a CPS 1200 Mk2 and i want to know if it is possible to K mod it i know how to K mod but how can I get the nozzle cover off its glued on.
Last edited by The Soaker on Thu Jun 16, 2011 5:48 am, edited 1 time in total.

User avatar
strato_2r5
Posts: 162
Joined: Thu Mar 03, 2011 11:08 pm

Re: CPS 1200Mk2.

Post by strato_2r5 » Thu Jun 16, 2011 2:56 am

It is K-mod compatible; it has a spherical CPS bladder (correct me if I'm wrong). Check the modifications guide for a tutorial on the K-mod.
Sorry if I'm not active much, busy on another forum and another project non-soaker related.

User avatar
The Soaker
Posts: 23
Joined: Thu Jun 16, 2011 2:04 am

Re: CPS 1200Mk2.

Post by The Soaker » Thu Jun 16, 2011 2:59 am

yes it does have a spherical bladder.
CPS 2000!!!!!! *FWOOSH!!!*

User avatar
-G-JiV-
Posts: 350
Joined: Sat Oct 09, 2010 8:10 pm

Re: CPS 1200Mk2.

Post by -G-JiV- » Fri Jun 17, 2011 2:22 pm

I think the bigger problem here is to OPEN THE GUN.

Usually you can get off glued parts by using a thin screw driver. Gently pry around and try to get it off. You can also try to heat the plastic, to get same space between the two pieces.

Always a kind of game to come over this.
A gunner has to do what his Soaker requires...

User avatar
The Soaker
Posts: 23
Joined: Thu Jun 16, 2011 2:04 am

Re: CPS 1200Mk2.

Post by The Soaker » Fri Jun 17, 2011 4:31 pm

yes i have opened the gun but it's the Mk 2 and ive heard that the PRV opens at low pressures.
CPS 2000!!!!!! *FWOOSH!!!*

User avatar
-G-JiV-
Posts: 350
Joined: Sat Oct 09, 2010 8:10 pm

Re: CPS 1200Mk2.

Post by -G-JiV- » Fri Jun 17, 2011 8:09 pm

ok, so you have following two options:

- remove the pressure valve at all(cout it out and close the two pipe-ends with glue/epoxy. You can reconstruct the original mechanism if really needed and if the cut was made craefully)

- open the valve and change its power till the valve and pressure of the k-modded bladder does match well :) ( quite difficult but possible!)
A gunner has to do what his Soaker requires...

User avatar
The Soaker
Posts: 23
Joined: Thu Jun 16, 2011 2:04 am

Re: CPS 1200Mk2.

Post by The Soaker » Sat Jun 18, 2011 12:15 am

guess what. I did a 14 balloon K mod and the PRV never kicked in. update. now its 19 and thats the max
Last edited by The Soaker on Sat Jun 18, 2011 3:28 am, edited 1 time in total.
CPS 2000!!!!!! *FWOOSH!!!*

Locked