Ball Valve trigger mod
- strato_2r5
- Posts: 162
- Joined: Thu Mar 03, 2011 11:08 pm
Ball Valve trigger mod
I plan on adding a trigger to my modded Rattler. I originally planned to swap out the handle part of the metal valve with something like JLS used, but I forgot about the turn stoppers. Any ideas?
Sorry if I'm not active much, busy on another forum and another project non-soaker related.
-
- Posts: 451
- Joined: Mon May 23, 2011 10:52 pm
Re: Ball Valve trigger mod
You could mount the toque arm on the old handle.
- zeda.beta
- Posts: 683
- Joined: Sun May 03, 2009 10:49 pm
Re: Ball Valve trigger mod
I would use a solenoid, but some have reservations about electricity and water [even though the current doesnt (usually) have enough power].
If that isn't your cup of tea, I would suggest using a pulley system to reduce the force required to turn the valve.
If that isn't your cup of tea, I would suggest using a pulley system to reduce the force required to turn the valve.
I reject your reality and substitute my own.
Quack damn you.
Quack damn you.