Paint Jobs
-
- Posts: 10
- Joined: Sat Jun 05, 2004 2:47 pm
Hi there,
I plan to paint my CPS 1500 but im unsure what kind of paint I should use. Any suggestions?
The other question is, how I should do the painting itself, especially the critical parts, like the reservoir cap and the nozzle. Is there a Tutorial or something around?
I would also be interested in pictures of already painted soakers, I'll put mine here too as soon as it is finished...
Greetings
Codex
I plan to paint my CPS 1500 but im unsure what kind of paint I should use. Any suggestions?
The other question is, how I should do the painting itself, especially the critical parts, like the reservoir cap and the nozzle. Is there a Tutorial or something around?
I would also be interested in pictures of already painted soakers, I'll put mine here too as soon as it is finished...
Greetings
Codex
- RacerSoaker445
- Posts: 951
- Joined: Sun Mar 14, 2004 2:27 pm
Paint Kind: Krylon Fusion, It is like an adhesive, the paint bonds down to a molecular level. I have a painted 1500, I'll get a pic of it.
What I did was take the whole thing apart, take the case off, disconnect the PC and reservoir, tape over the O-rings, and spray. Also, try and take the cap off. This means reaching in and pulling it out.
EDIT: Attached pic of all my soakers. The painted 1500 is at the top.
What I did was take the whole thing apart, take the case off, disconnect the PC and reservoir, tape over the O-rings, and spray. Also, try and take the cap off. This means reaching in and pulling it out.
EDIT: Attached pic of all my soakers. The painted 1500 is at the top.
- Attachments
-
- MVC_018S.JPG (59.85 KiB) Viewed 1501 times
I don't check this forum anymore.
- SSCBen
- Posts: 6449
- Joined: Sat Mar 22, 2003 1:00 pm
Hmm, the tutorial I would have given you the link to is not online anymore. That's odd, I'll have to talk to webwoodrow about it.
Paint only the parts the need to be painted. The basically means only the visible stuff. Remember to cover up parts you don't want to get painted (like O ring as Racer said) with tape or something, I would recommend masking tape.
You will also want to sand the surface you are painting. That I find recommended by nearly everyone who paints. However, some paints, such as what Racer used, may not need that to work good.
Paint only the parts the need to be painted. The basically means only the visible stuff. Remember to cover up parts you don't want to get painted (like O ring as Racer said) with tape or something, I would recommend masking tape.
You will also want to sand the surface you are painting. That I find recommended by nearly everyone who paints. However, some paints, such as what Racer used, may not need that to work good.
- DX
- Posts: 1780
- Joined: Wed Feb 04, 2004 1:00 pm
Just use spray paint. It works well and doesn't wash off. I used spray paint for my old max-d 6000 to make it camo. I didn't sand the surfaces first and I should have, because it can sXPBackfire-esquee off. Also, if you use spray paint, it takes less than 5 min. You should put tape over parts that you Don't want to get painted, and then take the tape off when you're done. Its a whole lot easier and faster then conventional paint.
Mess With the Best, Get Soaked Like the Rest!
2004 Red Sox - World Series Champions
2007 Red Sox - World Series Champions!
2004 Red Sox - World Series Champions
2007 Red Sox - World Series Champions!
- BlueSmudge
- Posts: 886
- Joined: Sun Apr 18, 2004 10:57 pm
I havn't used it yet, because I'm saving up for paints, but I bought this stuff you spray on your gun (plastic) before you paint. It's like a primar. It makes it so you can paint it with anything, and it won't come off. Fingerpaint if you really want to. But I would still recommend a waterproof/resistant enamel paint just to be safe. The stuff cost me $7 US.
Just ask the guy at the hardware store in the paint department. They know stuff.
Just ask the guy at the hardware store in the paint department. They know stuff.
--------------------------------------------------------------
BlueSoak.net
--------------------------------------------------------------
BlueSoak.net
--------------------------------------------------------------
- RacerSoaker445
- Posts: 951
- Joined: Sun Mar 14, 2004 2:27 pm
-
- Posts: 515
- Joined: Thu Apr 15, 2004 11:45 pm
My mom said this to me when I wanted to spray paint my Xbox controler, and it was that it is not safe to get that paint in your hands for extended periods of time. It is like your skin taking in all the chemicals. She didn't tell me what would happen if I did do it, but I imagine that your hand gets all lumpy and itchy and you die. I'm not saying that this will happen, I'm just saying that you should be cautious, and also it would be much better if you could find a way to paint the handle and pump that would be safer.
But I'm not stopping you. I don't know what will happen.
But I'm not stopping you. I don't know what will happen.
- DX
- Posts: 1780
- Joined: Wed Feb 04, 2004 1:00 pm
As Ive said before just go and get regular old spray paint. It is safer than others and even with regular paint, if you get it on yourself NOTHING HAPPENS! Your hands will not get bumpy, itchy and you will not die. That is laughable. Ive handled river fungus, poison ivy, and the such, and none of that has even affected me at all. The worst paint can do to you is give you a headache from the scent unless you swallowed it. Extended contact won't do anything. If you want to safely paint the pump and handle, then just spray it form a distance. Your "skin taking in all the chemicals" is not even as bad as you breathing in all the chemicals in the air! In otherwords, the air you breathe will do more harm than getting paint on your hands which you can avoid in the first place.
Mess With the Best, Get Soaked Like the Rest!
2004 Red Sox - World Series Champions
2007 Red Sox - World Series Champions!
2004 Red Sox - World Series Champions
2007 Red Sox - World Series Champions!
- light bulb boi
- Posts: 74
- Joined: Mon Mar 24, 2003 8:04 pm
I just uploaded everything and now all the dead links are fixed. here is the link for my painting guide. http://www.soakage.net/tips/painting.htmlOriginally posted by DoomSoaker@Jun 5 2004, 12:52 PM
Hmm, the tutorial I would have given you the link to is not online anymore. That's odd, I'll have to talk to webwoodrow about it.
I find that the krylon flat camo paint works the best. It doesn't chip, is non-reflective and sticks without primer or sanding.Oh, if you are using the Fusion paint, make sure to do two coats of it on the PC and reservoir. If you don't, it sXPBackfire-esquees off showing the green.
-webwoodrow
-
- Posts: 10
- Joined: Sat Jun 05, 2004 2:47 pm
Hi there!
thanks for all your help. Unfortunately I coudn't get that Krylon paint over here in germany. Therefore I sanded the gun and used some black spray-paint for plastics.
On the most parts it worked quite well, but it already begins crackeling off the reservoir. Maybe I'll try to get that krylon paint from somewhere ales and sand off the paint on the reservoir again...
So here is my result: A CPS 1500 in black/purple look with a attached red-dot sight. Tell me what you think... (.jpg file is attached)
When I decide to repaint the reservoir - should I sand off the old color or just paint over with krylon?
Greetings
Codex
thanks for all your help. Unfortunately I coudn't get that Krylon paint over here in germany. Therefore I sanded the gun and used some black spray-paint for plastics.
On the most parts it worked quite well, but it already begins crackeling off the reservoir. Maybe I'll try to get that krylon paint from somewhere ales and sand off the paint on the reservoir again...
So here is my result: A CPS 1500 in black/purple look with a attached red-dot sight. Tell me what you think... (.jpg file is attached)
When I decide to repaint the reservoir - should I sand off the old color or just paint over with krylon?
Greetings
Codex
- Attachments
-
- CPS1500.jpg (41.03 KiB) Viewed 1487 times
- RacerSoaker445
- Posts: 951
- Joined: Sun Mar 14, 2004 2:27 pm