New Cps Mod
- SSCBen
- Posts: 6449
- Joined: Sat Mar 22, 2003 1:00 pm
Today I finally did a mod I thought of last summer. I haven't tested it out yet but I don't think it did any bad. I reccommend you do this to any K modded gun. I'll get a mod article up whenever, I don't think you'll need one anyway.
Basically, you know the holes on each side of your PC case? Those holes are sized for a stock blaster, us with K modded guns have PCs that collapse faster. Drill larger ones, of course after removing the PC! I drilled them so that they were 3/16" because I didn't want to make it too larger and possibly damage the CPS PC. Before they were about 1/16". You could do larger. I don't think it will have very much of a power increase but it couldn't hurt.
Basically, you know the holes on each side of your PC case? Those holes are sized for a stock blaster, us with K modded guns have PCs that collapse faster. Drill larger ones, of course after removing the PC! I drilled them so that they were 3/16" because I didn't want to make it too larger and possibly damage the CPS PC. Before they were about 1/16". You could do larger. I don't think it will have very much of a power increase but it couldn't hurt.
- NiborDude
- Posts: 683
- Joined: Sun May 23, 2004 12:00 pm
Instead of making a larger hole, you might want to just make more holes in different areas. Letting air get to different areas faster.
I don' think this mod will help in getting range, but its worth a shot.
I don' think this mod will help in getting range, but its worth a shot.
<span style='color:EEF2F7'>Blinding ignorance does mislead us. O! Wretched mortals, open your eyes! -Leonardo Da Vinci
- SSCBen
- Posts: 6449
- Joined: Sat Mar 22, 2003 1:00 pm
- Neuro
- Posts: 1081
- Joined: Thu May 01, 2003 12:00 pm
-
- Posts: 16
- Joined: Sat May 29, 2004 12:21 am
- SSCBen
- Posts: 6449
- Joined: Sat Mar 22, 2003 1:00 pm
When you K mod a soaker, the PC will collapse faster than it is supposed to. Air will fill in the space used by the water. The holes in the PC are made for a soaker with an unmodded PC. Larger holes will let more air flow through in the same amount of time. Think of the normal holes as something that restricts the flow due to the high power of a K modded gun. You don't want restrictions.
I don't think this mod will do anything substantial to the performance, but it won't hurt anything so I don't think there is any reason not to try it. I am still experimenting with it, I'll let you know the results tommorow.
I don't think this mod will do anything substantial to the performance, but it won't hurt anything so I don't think there is any reason not to try it. I am still experimenting with it, I'll let you know the results tommorow.
-
- Posts: 16
- Joined: Sat May 29, 2004 12:21 am