Threads about water gun modifications.
-
SSCBen
- Posts: 6449
- Joined: Sat Mar 22, 2003 1:00 pm
Post
by SSCBen » Tue Sep 09, 2003 7:41 pm
While I was trying to partial K mod my 2700, I thought of this mod to decrease the amount of pumps you have to do by a bit. I haven't tried it, but I'm 99.9% sure it will work, and it's really simple. I can't explain it well without pictures, so I'll get some and explain it then. Shouldn't take more than a week. :Hey, that's funny.:
-
dekard
- Posts: 9
- Joined: Mon Jul 28, 2003 2:08 pm
Post
by dekard » Tue Sep 09, 2003 8:16 pm
um... ok..
thanks for letting us know..
-
SSCBen
- Posts: 6449
- Joined: Sat Mar 22, 2003 1:00 pm
Post
by SSCBen » Tue Sep 09, 2003 10:51 pm
Your welcome. :Hey, that's funny.:
I've almost got it done, I just need to drill a hole and it should be done. I'm guessing it will decrease the amount of required pumps by 1 or 2. It's a really simple mod, too.
-
SSCBen
- Posts: 6449
- Joined: Sat Mar 22, 2003 1:00 pm
Post
by SSCBen » Thu Sep 11, 2003 7:20 pm
Almost got this mod done now... My first attemp I broke, but none of the soaker was broken. I just needed a few adjustments. I think it will be done tonigh. This mod does not only make you pump less but it should also make your pump shaft stronger. B)
-
Neuro
- Posts: 1081
- Joined: Thu May 01, 2003 12:00 pm
Post
by Neuro » Fri Sep 12, 2003 1:10 am
I need to get a 2700. the 2100 is too hard to open
"I used to care, but now I take a pill for that."
You can pretty much ignore the times on that, I rarely ever have Xfire on when I play. I should, though.
-
SSCBen
- Posts: 6449
- Joined: Sat Mar 22, 2003 1:00 pm
Post
by SSCBen » Fri Sep 12, 2003 9:44 am
My 2700 was pretty hard to open. All the screws were rusted. :nugget: But once I got it open I could open it again in no time. B) I think I'm going to replace the screws with higher quality ones one day.
-
SSCBen
- Posts: 6449
- Joined: Sat Mar 22, 2003 1:00 pm
Post
by SSCBen » Fri Sep 12, 2003 9:30 pm
I'm also modifiying the trigger so that it doesn't get stuck, since that is a problem that showed up recently. Does anyone know a good way for me to do this? I've got several ideas, but maybe someone else's would be better.
-
Neuro
- Posts: 1081
- Joined: Thu May 01, 2003 12:00 pm
Post
by Neuro » Sat Sep 13, 2003 3:31 am
ick, thats why my 2500 is broken - the valve jammed, then I squeezed the trigger too hard which cracked it
try wd-40'ing the valve connection
"I used to care, but now I take a pill for that."
You can pretty much ignore the times on that, I rarely ever have Xfire on when I play. I should, though.
-
SSCBen
- Posts: 6449
- Joined: Sat Mar 22, 2003 1:00 pm
Post
by SSCBen » Sat Sep 13, 2003 9:41 pm
I did. That isn't what's making it stuck. It's gets jammed on the resivior intake valve.
-
Neuro
- Posts: 1081
- Joined: Thu May 01, 2003 12:00 pm
Post
by Neuro » Tue Sep 23, 2003 9:23 pm
ohh - well either way my trigger is cracked. and I shall fix it using your newly-written tutorial.
"I used to care, but now I take a pill for that."
You can pretty much ignore the times on that, I rarely ever have Xfire on when I play. I should, though.
-
SSCBen
- Posts: 6449
- Joined: Sat Mar 22, 2003 1:00 pm
Post
by SSCBen » Tue Sep 23, 2003 10:14 pm
Since I posted that I fixed it. Enjoy the article.