XP 310 Missing Screws
- strato_2r5
- Posts: 162
- Joined: Thu Mar 03, 2011 11:08 pm
XP 310 Missing Screws
I recently opened up the pump handle on my XP 310 for a pump reinforcement. I seem to have misplaced the screws. Do they use standard sizes or are they custom made for the gun? Where can I get replacement screws?
Sorry if I'm not active much, busy on another forum and another project non-soaker related.
- wetmonkey442
- Posts: 320
- Joined: Sun Jun 22, 2003 12:00 pm
Re: XP 310 Missing Screws
Are you just missing the screws on the pump handle? I wouldn't worry about finding replacements, just wrap the handle in electrical tape to keep it together. The moldings are generally fitted to lock together so it should still stay pretty tight.
The screws are much smaller than normal screws, but if you look hard in a hardware store you may be able to find something that will work. From my experience, you really only need four or five screws to hold together the main case of any gun. They usually build them with a 2x or 3x redundancy on screws.
The screws are much smaller than normal screws, but if you look hard in a hardware store you may be able to find something that will work. From my experience, you really only need four or five screws to hold together the main case of any gun. They usually build them with a 2x or 3x redundancy on screws.
Join the fight! Support water warfare in your area today!
- soakernerd
- Posts: 302
- Joined: Thu Jan 21, 2010 7:09 pm
Re: XP 310 Missing Screws
You can also just take screws from the main body of the 310, or even from another gun. I have a huge number of extra screws, because every time a nerf gun/super soaker breaks, a take all the screws out. This gives you plenty of replacements.
Pessimist: These blasters hold no water
Optimist: But their small output means they last just as long
Marketing: Huge blasts of water!
user: I shot it at an angle and it went a whole ten feet!
Optimist: But their small output means they last just as long
Marketing: Huge blasts of water!
user: I shot it at an angle and it went a whole ten feet!